Panasonic EY7441LR2S 14.4V IP Drill & Driver Kit

Panasonic EY7441LR2S 14.4V IP Drill & Driver Kit powered by 3.3ah Cobalt "E" Li-ion battery pack. In addition the EY7441LR2S utilizes Panasonic's unique GuardION system. The GuardION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life.

Panasonic EY7460LZ2S 21.6V IP Li-ion Drill & Driver Kit

Panasonic EY7460LZ2S 21.6V IP Li-ion Drill & Driver Kit is powered by a 3.1ah Cobalt "Z" Li-ion battery pack which delivers high output with low heat generation resulting in twice the lifetime total performance versus current Ni-Cd battery packs.

Panasonic EY7460LZ2S 21.6V IP Li-ion Drill and Driver Kit

Battery Voltage 21.6 Volts
Battery Technology Li-Ion
Chuck Size 1/2 Inch Chuck
Chuck Style Keyless
Max. No Load RPM Speed 100-400/350-1,500 RPM
Maximum Torque 48 Foot-Pounds
Speed Settings Two Speed
Clutch Settings 18
Body Style Standard Body
Handle Style Mid-Handle
Switch Style Trigger Switch

Grizzly G0500 14 Inch Sliding Table Saw

Grizzly G0500 14 Inch Sliding Table Saw.

This review is from: Grizzly G0501 14" Sliding Table Saw (Misc.)

The company I work for in their startup purchased this machine.
I was the one that set it up, which probaly took 10 hours. The sliding table, almost feels gritty instead of smooth with an occasional bump. The very first time we tried to use the scoring blade, the alignment motor fell off. The customer support for this was a nightmare, because no one there nows anything about it. The instruction book is very vauge with its 25 or so pages. The crosscut fence has yet to hold any tolerance at all and the stop scale will change from the front position to the rear. My reccomendation is to spend the extra 25 to 30% extra on a Felder.

Grizzly G0497 Professional Planishing Hammer

Grizzly G0497 Professional Planishing Hammer will shape mild steel up to 16 gauge. Air operated, it includes filter, oiler and foot pedal. Stainless steel main shaft and hardened steel hammer head.

Grizzly G0497 Professional Planishing Hammer Specifications:

Detailed instruction manual
Overall dimensions: 62"H x 30-7/8"W x 34-1/2"D
Frame tube size: 4" x 4"
Throat: 24"
Head opening: 2-1/2"
Air requirements: 15-120 PSI
CFM requirements: 12
Blows per minute: 4,600
Height adjustment: 1-1/2"

Grizzly G0496 Professional English Wheel

Grizzly G0496 Professional English Wheel Features 9 interchangeable hardened metal rolls with sealed bearings, cam quick release and foot wheel.

Grizzly G0496 Professional English Wheel Specifications:

Overall dimensions: 53"H x 30-7/8"W x 44-1/2"D
Throat: 37-3/4"
90 degree swivel head
Detailed instruction manual
Upper roll size: flat, 2-1/4"W x 6" diameter

Grizzly G0495X 8 Inch x 84 Inch Jointer with Exclusive Digital Height Readout

Grizzly G0495X 8 Inch x 84 Inch Jointer with Exclusive Digital Height Readout.

Digital readout for infeed table height
Magnetic switch with thermal overload protection
Precision ground cast iron tables and fence
Parallelogram table adjustment
Handwheel table movement
Pedestal mounted switch controls
Heavy-duty center mounted fence
Rack & pinion fence adjustment
Built-in dust chute with 4" port
Powder coated paint

Grizzly G0495X 8 Inch x 84 Inch Jointer Specifications:

Motor: 3 HP, 220V, single-phase, TEFC, 3450 RPM
Total table size: 8-1/8" x 82-1/2"
Infeed table size: 8-1/8" x 42"
Cutterhead: 4 row spiral with 36 indexable solid carbide inserts
Cutterhead speed: 7000 RPM
Cutterhead diameter: 3-1/16"
Floor to table height: 31"
Max. rabbeting depth: 1/2"
Fence stops: 45°, 90° & 135°
Deluxe cast iron fence size: 38"L x 1-1/2"W x 4-3/4"H
Approximate shipping weight: 796 lbs.

Grizzly G0488 14 Inch 10 HP 3-Phase Sliding Table Saw

Grizzly G0488 14 Inch 10 HP 3-Phase Sliding Table Saw Having all the features of our G0451 Sliding Table Saw, our new G0493 has the addition of a larger 10 foot travel on the sliding table.

Grizzly G0487 51 Inch 30 HP 3-Phase Double Wide-Belt Sander

Grizzly G0487 51 Inch 30 HP 3-Phase Double Wide-Belt Sander feature dual heads enabling them to sand to finer grits in a single pass! The first belt runs on a single drum and the rear belt runs on a platen system which allows you to adjust the sanding depth. If you are still sanding through 2 grit levels using a single head wide-belt sander you are not being the most efficient.

Grizzly G0487 Wide-Belt Sander Specifications:

Sanding motor HP: 30 HP, TEFC
Sanding motor voltage: 220/440V
Sanding motor phase: 3-phase
Sanding motor amps: 72/36A
Conveyor motor HP: 2 HP, TEFC
Conveyor motor amps: 6.5/3.3A
Table lift motor HP: 1/4 HP, TEFC
Table lift motor amps: 1.2/0.6A
Footprint: 68" x 31"
Maximum board width: 51"
Maximum board thickness: 6"
Minimum board length: 11"
Minimum board thickness: 3/16"
Front drum surface speed: 3543 FPM
Rear drum surface speed: 2565 FPM
Conveyor speed: 14-60 FPM
Sanding belt size: 51" x 75"
Overall width: 71"W
Overall height: 79"H
Overall depth: 59-1/2"D
Approx. shipping weight: 3880 lbs.

Grizzly G0481 42 Inch Swivel Bending Brake

Grizzly G0481 42 Inch Swivel Bending Brake.

Maximum working length: 42"
Maximum sheet metal thickness: 16 Ga. mild steel
Maximum clamping beam lift: 4 3/4"
Maximum bending angle: 150 degrees
Box bending fingers: (4 each) 1-1/2", 2", 3", 4"
Overall dimensions: 52" wide x 42 1/2" high x 30 3/4" deep
Weight: 471 lbs.

Grizzly G0477 15 Inch Planer / Moulder

Grizzly G0477 15 Inch Planer / Moulder A powerful universal motor and high speed cutterhead will make quick and convenient work out of your planing and moulding jobs. Easy knife changes along with a large selection of profiles adds versatility and the built-in dust collection really makes cleanup a breeze.

Grizzly G0477 15 Inch Planer / Moulder Specifications:

Motor: 2-1/2 HP, 110V, single-phase
Amps: 12
Maximum cutting width: 15"
Maximum cutting height: 6"
Minimum stock thickness: 1/8"
Minimum stock length: 17"
Maximum cutting depth: 3/32"
Feed rate: 11 FPM & 22 FPM
Cutterhead diameter: 3-15/64"
Number of knives: 2 (reversible)
Cutterhead speed: 5,500 RPM
Cuts per minute: 11,000
Feed roller adjustment: 25/32"
Table size: 15" x 16"
Preset thickness stops: 1/8", 1/4", 1/2", 3/4", 1" & 1-1/4"
Approximate shipping weight: 181 lbs.

Grizzly G0476 Benchtop Sandblast Cabinet

Grizzly G0476 Benchtop Sandblast Cabinet. can be filled with a variety of abrasive material for cleaning, polishing and finishing. Sealed gloves allow complete access inside the enclosed cabinet for operating the blast gun and moving the part. Includes blasting gun with 4 ceramic tip sizes and a built-in fluorescent lamp. Overall size is 23" wide x 19" deep x 19 1/4" high. Approximate shipping weight: 53 lbs.

Grizzly G0475 10 Gal Portable Sandblaster

Grizzly G0475 10 Gal Portable Sandblaster.

Pressurized tank for more sandblasting power
4 Valves for optimum control over the air/sand stream
Heavy-duty feed hose and fittings for long life
Self emptying moisture trap
Pressure gauge
Safety pressure relief valve
Blasting hood and funnel
4 Ceramic replacement tips

Grizzly G0475 10 Gal Portable Sandblaster Specifications:

Maximum pressure: 125 PSI
Blasting hose length: 8'
Capacity: 100 lbs.
Fill port: 1"
Tip bore sizes: .065", .095", .115", and .135"
Approximate shipping weight: 53 lbs.