Hitachi EC25E 5.5 HP Gas Powered, 8 Gallon Wheelbarrow Air Compressor w/ Control Panel, Oil-lube

Hitachi EC25E 5.5 HP Gas Powered, 8 Gallon Wheelbarrow Air Compressor w/ Control Panel, Oil-lube

• 8-gallon twin tank receivers capable of running multiple nailers
• 6.5hp, industrial OHV Honda engine for dependability and power
• Pneumatic idle control and throttle for added safety
• Cast iron pump with oil splash lubrication and ball bearing mounted crank shaft for durability
• 10” fly cooling wheel, coupled with a shroud to direct air over compressor coils, allows continuous use without the threat overheating
• Twin drain cocks provide easy maintenance
• Large canister intake filter with replaceable element protects compressor in harsh worksite environments
• Belt drive lowers pump rpm for longer life

Includes:

• Synthetic Oil SAE5W50 8oz
• Oil Dipstick

Hitachi EC119SA 1.6 HP 4 Gallon Air Compressor, Side Stack w/ Control Panel, Oil-lube

Hitachi EC119SA 1.6 HP 4 Gallon Air Compressor, Side Stack w/ Control Panel, Oil-lube

• Powerful 15 Amp induction motor for quiet operation and extended use as compared to universal motor products
• Contractor preferred 4-gallon twin stack features a large finned head pump and metal cooling fan to keep the pump cool during tough applications
• Oil lubricated pump utilizes oversized bearings for quiet and dependable service
• Produces 5.3 cfm @ 40psi and 4 cfm @ 100psi
• Locking regulator and 105 on/135 off psi means no worries about pressure wander or pressure starved tools on the job
• Unique roll cage design protects the pump and motor from damage
• Custom integrated control panel protects the gauge, regulator and plumbing, while centralizing controls for ease of use
• Convenient features include easy to use drain ball valves, a cord wrap that secures the cord when not in use, a protected pressure switch, shock absorbing feet, manual overload protection, two handed handle for manageability and two factory installed couplers ready for plug and play functionality
• Lightweight at just 63.7 lbs

Includes:

• Industrial Couplers (2) - 885571
• Synthetic Oil- SAE5W50 (8 oz.) - 19210 
• Oil Dipstick- 881469

Hitachi EC12 1.5 HP/2.0 Peak 4 Gallon Air Compressor, Twin Stack, Oil-lube

Hitachi EC12 1.5 HP/2.0 Peak 4 Gallon Air Compressor, Twin Stack, Oil-lube

• 4.0cfm at 90psi for multiple operations
• Direct drive electric motor provides durability and long life
• Line regulator with gauge for immediate use at worksite
• O-ring on drain-cock makes valve easy to open and close
• Vertically stacked twin tanks, 2 gallon capacity each for running multiple nailers
• All metal inner construction and fan to withstand rugged use
• Oil lubricated pump improves efficiency and ensures smooth use

Includes:

• Synthetic Oil SaE5W50 8oz
• Oil Dipstick
• Pressure Gauge

Hitachi EC89 1.35 HP/2.0 Peak, 135 Max PSI, 4 Gal Air Compressor, Twin Stack, Oil-lube

Hitachi EC89 1.35 HP/2.0 Peak, 135 Max PSI, 4 Gal Air Compressor, Twin Stack, Oil-lube

• Cast iron, oil-lubricated pump for cooler operation and greater longevity
• 13 Amp direct drive induction motor delivers efficient and reliable performance
• Manual reset thermal overload protection stops the motor in case of overheating
• Locking regulator ensures the proper pressure is delivered to your tool
• 105 On/135 Off pressure switch for less cycling
• Quick coupler for fast tool changes
• Lightweight and portable for easy jobsite transport
• Ball valve drain cock for quick and simple tank draining

Includes:

• Quick Connect Coupler (885447)
• Synthetic Oil SAE5W50 8 oz. (19210B)
• Oil Dipstick (881469)

Hitachi HHT11A50 7/16 Inch Crown Hammer Tacker

Hitachi HHT11A50 7/16 Inch Crown Hammer Tacker

Hitachi HHT11A50 7/16" Crown Hammer Stapler Ideal for fastening down tar paper and other roofing materials Use RAPID 140, ARROW A11, T-50 or other A11 type staples Specifications: Hitachi HHT11A50 7/16" Crown Hammer Stapler Staple Width -- 7/16" Staple Length -- 5/16" 9/16" Staple Gauge -- 20 Capacity -- 168 Staples (Recommended) -- Arrow A11 or T-50 /Rapid 140 Shipping Weight -- 5 lbs.

Hitachi HHT50DF 1/2 Inch Crown Hammer Tacker

Hitachi HHT50DF 1/2 Inch Crown Hammer Tacker

Hitachi HHT50DF 1/2" Crown Hammer Stapler Ideal for fastening down tar paper and other roofing materials Use DUO-FAST 5000 or Similar to Duo-Fast Specifications: Hitachi HHT50DF 1/2" Crown Hammer Stapler Staple Width -- 1/2" Staple Length -- 1/4" 3/8" Staple Gauge -- 20 Capacity -- 168 Staples (Recommended) -- Duo-Fast 5000/DF50 staples Shipping Weight -- 6 lbs.

Hitachi NT50AGF 2 Inch Pneumatic Flooring Cleat Nailer

Hitachi NT50AGF 2 Inch Pneumatic Flooring Cleat Nailer

• Oil-less design for long life and prevention of oil stains on wood flooring
• Integrated safety protects the user and work piece by preventing accidental driving
• Quick release gate automatically opens in the event of a jam for easy clearing
• High capacity magazine reduces downtime with fewer reloads
• "Preferred Seating System" for accurate placement of fasteners at the proper angle and depth
• Uses Hitachi T-cleats for less splitting and maximum holding power- 2" T-cleat (42629H), 1-1/2" T-cleat (42640H)
• Includes Face Nailing Shoe for face nailing the first 2 and last 6 rows of tongue & groove flooring
• Sold separately- 9/16" Shoe Base and Pad (330458) for 9/16" solid wood flooring
• Sold separately- 33/32" Shoe Base and Pad (330459) for 33/32" solid wood flooring
• Sold separately- Bamboo Accessory Shoe (330460) for 5/8" - 3/4" Bamboo and imported solid flooring
• Sold separately- Nail Set (330328) for "T" and "L" cleats

Includes:

• Non-marring Hammer (330454)
• Face Nailing Shoe (330438)
• Face Nailing Shoe Pad (330451)
• Safety Glasses (875769)
• Wrench Kit (330455)
• Grease (330457)
• Carrying Case (330456)

Hitachi NT50AF 2 Inch Pneumatic Flooring Cleat Nailer

Hitachi NT50AF 2 Inch Pneumatic Flooring Cleat Nailer

• Uses both "T" and "L" Cleats for use with a greater variety of fasteners
• Integrated safety protects the user and work piece by preventing accidental drives
• High capacity magazine reduces downtime by requiring fewer reloads
• "Preferred Seating System" provides accurate placement of fasteners and the proper angle and depth
• High strength aluminum housing for less weight and greater durability
• Non-marring accessory shoes allow for nailing in a variety of sizes, while preventing damage to the floor
• Uses Hitachi "T" and "L" Cleats- 2" T-Cleat (42629H), 1-1/2" T-Cleat (42640H), 2" L-Cleat (04702H), 1-1/2" L-Cleat (04704H)
• Sold separately- Wide Profile Flooring Shoe (330389) for 9/16" - 3/4" pre-finished wood flooring- may also be used for 5/8" - 3/4" imported and Bamboo flooring
• Sold separately- Nail Set (330328) for "T" and "L" cleats

Includes:

• Non-marring Hammer (330631)
• 1/2" Shoe Pad (330387)
• 3/4" Shoe Pad (330381)
• Safety Glasses (875769)
• Wrench Set (330386)
• Carrying Case (330388)

Hitachi N5009AF 2 Inch 15.5 Ga 1/2 Inch Crown Pneumatic Flooring Stapler

Hitachi N5009AF 2 Inch 15.5 Ga 1/2 Inch Crown Pneumatic Flooring Stapler

• Integrated safety protects the user and work piece by preventing accidental drives
• High capacity magazine reduces downtime by requiring fewer reloads
• "Preferred Seating System" provides accurate placement of fasteners at the proper angle and depth
• High strength aluminum housing for less weight and greater durability
• Non-marring accessory shoes allow for driving in a variety of sizes, while preventing damage to the floor
• Uses Hitachi 15-1/2 Gauge Staples- 2" x 15-1/2 GA x 1/2" Crown Staples (04722H) and 1-1/2" x 15-1/2 GA x 1/2" Crown Staples (04724H)
• Sold separately- Wide Profile Flooring Shoe (330389) for 9/16" - 3/4" pre-finished wood flooring- may also be used for 5/8" - 3/4" imported and Bamboo flooring

Includes:

• Non-marring Hammer (330631)
• 1/2" Shoe Pad (330387)
• 3/4" Shoe Pad (330381)
• Safety Glasses (875769)
• Wrench Set (330386)
• Carrying Case (330388)

Hitachi NT50YF 2 Inch Manual Flooring Cleat Nailer

Hitachi NT50YF 2 Inch Manual Flooring Cleat Nailer

• Ratcheting ram ensures the cleats are set properly by returning the ram after the cleat is completely set
• Multiple blow design reduces user fatigue by requiring less force to drive a cleat
• "Preferred Seating System" provides accurate placement of fasteners at the proper angle and depth
• High strength aluminum housing for less weight and greater durability
• Non-marring accessory shoes allow tongue and face nailing in a variety of sizes while preventing damage to the floor
• Uses Hitachi "T" cleats for less splitting and maximum holding power- 2" T-Cleat (42629H), 1-1/2" T-Cleat (42640H)
• Sold separately- Face Nailing Shoe (330317) for face nailing the first 2 and last 6 rows of tongue & groove flooring
• Sold separately- Thin Flooring Shoe (330318) for 3/8" - 9/16" solid wood flooring
• Sold separately- Bamboo Accessory Shoe (330237) for 5/8" - 3/4" Bamboo and imported solid flooring
• Sold separately- Nail Set (330328) for "T" and "L" cleats
• Sold separately- Shim Pack (330629)

Includes:

• Non-marring Hammer (330319)
• Extension Handle (330278)
• Safety Glasses (875769)
• Service Parts Kit (330324)
• Carrying Case (330325)

Hitachi N2503AF 1 Inch 20 Ga 3/16 Inch Crown Pneumatic Flooring Stapler

Hitachi N2503AF 1 Inch 20 Ga 3/16 Inch Crown Pneumatic Flooring Stapler

• Dual trigger design for more comfortable operation when working in a variety of positions
• Tool-free adjustable shoe for easy adjustments to flooring thicknesses of 1/4" to 7/16"
• Soft grip handle reduces user fatigue
• Contact safety prevents accidental drives
• Compact and lightweight to easily maneuver and gain access to the tightest areas
• Uses Hitachi 20-Gauge Flooring Staples- 1" x 20 Ga. x 3/16" Crown Staples (47592H)

Includes:

• Safety Glasses (875769)
• Wrench Set (330556)
• Carrying Case (330555)

Hitachi N5024A2 2 Inch 16 Ga Wide 1 Inch Crown Stapler

Hitachi N5024A2 2 Inch 16 Ga Wide 1 Inch Crown Stapler

• Lightweight and well-balanced for easy of maneuverability and less user fatigue
• Cylinder valve firing mechanism provides quick response and rapid driving
• Tool-less depth adjustment for quick changes to countersink or flush drive into a variety of materials
• Quick clear nose with tool-less jam release reduces down-time
• Stainless steel plated magazine for added durability to endure tough projects
• High capacity magazine hold 157 staples for fewer replenishments
• Open magazine design allows users to quickly check staple quantity
• Rubber grip provides comfort and ensures a secure hold

Includes:

• Safety Glasses (875769)

Optional Accessory:

• Sequential Trip Mechanism (876762)

Hitachi N5021A 2 Inch 16 Ga Wide 15/16 Inch Crown Stapler

Hitachi N5021A 2 Inch 16 Ga Wide 15/16 Inch Crown Stapler

• Uses wide 15/16" crown staples from 5/8" - 2" in length
• At 4.7lbs, exceptionally lightweight and well-balanced for easy maneuverability and minimal user fatigue
• Hitachi's next generation industrial design with ergonomic details and stainless steel plating to endure tough jobs
• Cylinder valve firing mechanism provides a quick response and powerful driving- up to 13 staples per second
• Tool-less depth of drive control for flush drives into various materials
• High capacity magazine holds 150 staples, allowing for fewer replenishments
• Tool-less jam release reduces down time
• Open magazine design for monitoring staple quantity and preventing blank drives
• Long-lasting elastomer grip surface for added comfort
• Top load magazine for easy access and quick reloading

Includes:

• Safety glasses

Hitachi N5010A 2 Inch 16 Ga Medium 1/2 Inch Crown Stapler

Hitachi N5010A 2 Inch 16 Ga Medium 1/2 Inch Crown Stapler

• Uses standard 1/2" crown staples from 3/4" - 2" in length
• At 4.4lbs, exceptionally lightweight and well-balanced for easy maneuverability and minimal user fatigue
• Hitachi's next generation industrial design with ergonomic details and stainless steel plating to endure tough jobs
• Cylinder valve firing mechanism provides a quick response and powerful driving- up to 13 staples per second
• Depth of drive control for flush drives into various materials
• High capacity magazine holds 150 staples, allowing for fewer replenishments
• Tool-less jam release reduces down time
• Open magazine design for monitoring staple quantity and preventing blank drives
• Long-lasting elastomer grip surface for added comfort
• Top load magazine for easy access and quick reloading

Includes:

• Safety glasses
• Hex bar wrench

Hitachi N3804AB3 1 1/2 Inch 18 Ga Narrow 1/4 Inch Crown Stapler

Hitachi N3804AB3 1 1/2 Inch 18 Ga Narrow 1/4 Inch Crown Stapler

• 2.3 lbs, lightweight and well-balanced for ease of use
• Selective actuation, easy to reach switch to choose between bump fire or sequential fire modes
• Tool free depth adjustment allows for a professional finish with varying materials- simply dial in the desired depth and efficiently finish the job
• Tool-less, easy to clear nose for quick and simple staple extraction
• 360 degree adjustable exhaust can be directed away from the user in any direction
• No-mar tip included to prevent scarring and denting of work surface
• Factory installed air fitting for convenience
• High capacity magazine holds up to 130 staples for maximum efficiency
• Elastomer grip adds comfort and security

Includes:

• Safety Glasses
• No-Mar Tip
• Case

Hitachi NC40G 1 1/2 Inch Concrete Nailer - Gas

Hitachi NC40G 1 1/2 Inch Concrete Nailer - Gas

With a lightweight and compact design, this nailer still has a high driving power of 80 Joules. It has 2 x 1.4Ah batteries and a 60 minute charger that eliminate downtime. It also has up to 1200 nails per fuel cell with dry firing lockout to eliminate misfiring. It is easy to clean and has an easy access fuel cell chamber. Includes: 2 x 7.2V, 1.4Ah batteries 60 minute charger Safety glasses 2 hex wrenches Oil Nose cap Carrying case.

Hitachi NT50GS 2 Inch 18 Ga Finish Brad Nailer - Gas

Hitachi NT50GS 2 Inch 18 Ga Finish Brad Nailer - Gas

• Powered by a gas fuel rod and Lithium Ion battery for complete portability
• Freedom from cumbersome air hose and compressor saves time in setup, during applications and in jobsite clean up
• Lightweight at only 4 lbs for balance, maneuverability and minimal user fatigue and ideal for overhead and extended use applications
• Fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle
• Quick clear nose with tool-less jam release for easy maintenance and reduced downtime
• Double lock fuel compartment latches securely and keeps the fuel rod seated firmly
• Hitachi's 3.6V Lithium Ion batteries drive up to 2,000 fasteners per charge
• Finish nailer fuel rods power 1,200 drives each
• Low battery indicator light alerts the user of battery status to prevent unexpected downtime
• Patented elastomer handle provides comfort and ensures a secure grip
• Tool-less depth of drive adjustment for flush drives into various materials
• 1-Hour AC/DC charger with adapters for charging in standard wall outlets or in the car
• Detachable no-mar nose cap protects work surfaces from scratches or indentations
• Variable position hook accommodates either left or right handed users
• Straight magazine holds 100 18-gauge fasteners in 5/8" to 2" lengths
• Reload indicator for easy visual recognition of low nail quantities to avoid dry firing

Includes:

• (2) 3.6V HXP Lithium Ion Batteries (326263)
• AC/DC Charger (UC3SML)
• Carrying Case (886348)
• Safety Glasses (875769)
• No-Mar Tip (886349)
• 4mm Hex Bar Wrench (944458)
• 3mm Hex Bar Wrench (943277)

Sold Separately:

• Fuel Rod (728981)

Hitachi NT65GA 2 1/2 Inch 15 Ga. Angle Finish Nailer (34 degree) - Gas

Hitachi NT65GA 2 1/2 Inch 15 Ga. Angle Finish Nailer (34 degree) - Gas

• Powered by a gas fuel rod and Lithium Ion battery for complete portability
• Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in job site clean up
  
• Lightweight at only 4.4 lbs for balance, maneuverability and minimal user fatigue and ideal for overhead and extended use applications
  
• Fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle
  
• Quick clear nose with tool-less jam release for easy maintenance and reduced downtime
  
• Double lock fuel compartment latches securely and keeps the fuel rod seated firmly
  
• Hitachi's 3.6V Lithium Ion batteries drive up to 2,000 fasteners per charge
  
• Finish nailer fuel rods power 1,200 shots each
  
• Low battery indicator light alerts the user of battery status to prevent unexpected downtime
  
• Patented elastomer handle provides comfort and ensures a secure grip
  
• Tool-less depth of drive adjustment for flush drives into various materials
  
• 1-Hour AC/DC charger with adaptors for charging in standard wall outlets or in the car
  
• Detachable no-mar nose cap protects work surfaces from scratches or indentations and conveniently snaps onto the side of the magazine for storage
  
• Dry fire lockout prevents blank activation, prolonging tool life and protecting work surfaces from damage
  
• Variable position hook for either left or right-handed users
  
• Angled magazine holds 100 15-gauge fasteners in 1-1/4"-2-1/2" lengths
  

Includes:

• Two (2) 3.6V Lithium Ion batteries
  
• AC/DC Charger (for car or wall outlets)
  
• No Mar Tip
  
• Safety Glasses
  
• Hex Bar Wrenches
  
• Carrying Case

Hitachi NT65GB, 2 1/2 Inch 16 Ga. Angle Finish Nailer, (20 degree) - Gas

Hitachi NT65GB, 2 1/2 Inch 16 Ga. Angle Finish Nailer, (20 degree) - Gas

• Powered by a gas fuel rod and Lithium Ion battery for complete portability
• Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in job site clean up
• Lightweight at only 4 lbs for balance, maneuverability and minimal user fatigue and ideal for overhead and extended use applications
• Fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle
• Quick clear nose with tool-less jam release for easy maintenance and reduced downtime
• Double lock fuel compartment latches securely and keeps the fuel rod seated firmly
• Hitachi's 3.6V Lithium Ion batteries drive up to 2,000 fasteners per charge
• Finish nailer fuel rods power 1,200 shots each
• Low battery indicator light alerts the user of battery status to prevent unexpected downtime
• Patented elastomer handle provides comfort and ensures a secure grip
• Tool-less depth of drive adjustment for flush drives into various materials
• 1-Hour AC/DC charger with adaptors for charging in standard wall outlets or in the car
• Detachable no-mar nose cap protects work surfaces from scratches or indentations and conveniently snaps onto the side of the magazine for storage
• Dry fire lockout prevents blank activation, prolonging tool life and protecting work surfaces from damage
• Variable position hook for either left or right-handed users
• Angled magazine holds 100 16-gauge fasteners in 1-1/4"-2-1/2" lengths

Includes:

• Two (2) 3.6V Lithium Ion batteries
• AC/DC Charger (for car or wall outlets)
• No Mar Tip
• Safety Glasses
• Hex Bar Wrenches
• Carrying Case

Hitachi NT65GS, 2 1/2 Inch 16 Ga. Straight Finish Nailer, - Gas

Hitachi NT65GS 2 1/2 Inch 16 Ga. Straight Finish Nailer - Gas

• Powered by a gas fuel rod and Lithium Ion battery for complete portability
• Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in job site clean up
• Lightweight at only 4 lbs for balance, maneuverability and minimal user fatigue and ideal for overhead and extended use applications
• Double action nail feed and reciprocating piston system drive up to 2 nails per second or 1,000 per hour
• Fuel rods can be replenished immediately upon depletion instead of waiting for a compressor cycle
• Quick clear nose with tool-less jam release for easy maintenance and reduced downtime
• Double lock fuel compartment latches securely and keeps the fuel rod seated firmly
• Hitachi's 3.6V Lithium Ion batteries drive up to 2,000 fasteners per charge
• Finish nailer fuel rods power 1,200 shots each
• Low battery indicator light alerts the user of battery status to prevent unexpected downtime
• Patented elastomer handle provides comfort and ensures a secure grip
• Tool-less depth of drive adjustment for flush drives into various materials
• 1-Hour AC/DC charger with adaptors for charging in standard wall outlets or in the car
• Detachable no-mar nose cap protects work surfaces from scratches or indentations and conveniently snaps onto the side of the magazine for storage
• Dry fire lockout prevents blank activation, prolonging tool life and protecting work surfaces from damage
• Variable position hook for either left or right-handed users
• Straight magazine holds 100 16-gauge fasteners in 1"-2-1/2" lengths

Includes:

• Two (2) 3.6V Lithium Ion batteries
• AC/DC Charger (for car or wall outlets)
• No Mar Tip
• Safety Glasses
• Hex Bar Wrenches
• Carrying Case

Hitachi NR90GR, 3 1/2 Inch Full Head Framing Nailer, - Gas

Hitachi NR90GR 3 1/2 Inch Full Head Framing Nailer - Gas

• Gas Powered, operates on fuel rod and cordless battery offering complete portability through elimination of air hose and compressor
• Well balanced and lightweight (only 7.9 lbs) reducing user fatigue
• Adjustable depth of drive nose piece assures proper nail down with varying materials
• Interchangeable 7.2V, 1.4Ah battery is compatible with most Hitachi charging systems and charges in 1 hour (half the time of the leading competition)
• Easy two-step loading procedure saves time and energy
• Double lock fuel compartment latch keeps the fuel rod seated firmly and won't pop open interrupting operation
• Drives up to 2 nails per second and 1000 nails per hour
• Battery will fire over 4,000 nails per charge and each fuel rod fires 1,200 nails
• NR90GR fires up to 3-1/2 inch x .131 round head nails (the competition falls off at 3-1/4 inch nail range) to offer maximum flexibility and versatility on the job
• A six nail lock out feature prevents "dry fire" and assures fastening
• Collapsible rafter hook can be used to hang the tool from a rafter when both hands are needed
• Low battery indicator light alerts the user of battery status to prevent unexpected downtime
• E-Z view magazine provides simple nail check to avoid untimely reloads
• Patented elastomer grip coats the handle to provide comfort and ensure a secure grip

Includes:

• 7.2V, 1.4Ah Battery (EB714S)
• Charger
• Carrying Case
• Safety Glasses

Hitachi NR90GC2, 3 1/2 Inch Clipped Head Framing Nailer - Gas

Hitachi NR90GC2, 3 1/2 Inch Clipped Head Framing Nailer - Gas

• Gas powered; operates on fuel rod and cordless battery, offering complete portability through elimination of air hose and compressor
• Improved air filter design for improved dust protection
• Improved switch requires less pushing force to operate
• Collapsible and reversible rafter hook accomodates both left and right handed users and folds securely away when not needed
• Drives up to a 3-1/2 inch x .131 paper collated framing nail
• Dry-fire lockout prevents accidental dry-fire and assures nails are lodged securely and work is completed as intended for added safety
• Rear mounted 7.2V, 1.4Ah NiCd battery provides superior balance to reduce user fatigue
• Adjustable depth of drive assures proper nail down with varying materials
• 1-hour charge time is half the charging time of the leading competition
• Two-step nail loading for fast and easy nail replenishments to reduce downtime
• Nailer drives over 4,000 nails per charge and each fuel rod (sold separately) drives 1,200 nails
• Nailer drives 2 nails per second and 1,000 nails per hour
• Low battery indicator light alerts the user of battery charge status to prevent unexpected downtime
• E-Z view magazine is made from a composite material that offers exceptional strength and reduces weight, while providing an easy view of the nails to avoid untimely reloads
• Well-balanced and lightweight at only 7.7 lbs reducing user fatigue

Includes:

• (1) 7.2V 1.4Ah NiCd Battery (325292)
• One-hour Charger (UC7SD)
• Safety Glasses (886146)
• 4mm Hex Bar Wrench (944458)
• Carrying Case (886146)

Sold Separately:

• Tall Fuel Rod (728982D)

Hitachi VH650 2 1/2 Inch Fencing Coil Nailer (plastic collation)

Hitachi VH650 2 1/2 Inch Fencing Coil Nailer (plastic collation)

• 6.6lbs, lightweight and well balanced for easy maneuverability
• Angled magazine, for ease of use in corner applications
• Open magazine canister, to quickly check nail quantity
• High capacity canister holds up to 385 nails
• Accepts plastic collated nails for fencing and siding applications
• Optional accessory: Single Trip Trigger Mechanism

Includes:

• Safety Glasses
• Hex Bar WrenchesSaw

Hitachi NV83A2 3 1/4 Inch Full Head Fraiming Coil Nailer (wire collation)

Hitachi NV83A2 3 1/4 Inch Full Head Fraiming Coil Nailer (wire collation)

• 8.2lbs, lightweight and well balanced for easy maneuverability
• Quick driving, 2-valve, cylinder drive system for efficiency
• Side load magazine, easy to quickly replenish nails
• Hardened aggressive toenail push lever, resists wear for prolonged life
• Open nose design, for easy extraction of a jammed nail
• Plastic shield, deflects wire collation for added safety
• Long-lasting rubber grip, for added comfort
• View the recommended fastener guide

Includes:

• Safety Glasses
• Tool Lubricant

Hitachi NV75AG 3 Inch Utility Coil Nailer (wire/plastic sheet collation)

Hitachi NV75AG 3 Inch Utility Coil Nailer (wire/plastic sheet collation)

• 5.5lbs, lightweight and well balanced for easy maneuverability
• Side load magazine, easy to quickly replenish nails
• Tool-less depth of drive adjustment, for precision nailing/flush driving
• Drives both wire collated and plastic sheet collated nails for added flexibility
• Adjustable air deflector, directs the air exhaust in any direction
• Plastic shield, deflects wire collation for added safety
• Long-lasting rubber grip, for added comfort

Includes:

• Safety Glasses