Delta 46-455 12-1/2 Inch 5-Speed Midi Lathe

The Delta 46-455 12-1/2 Inch 5-Speed Midi Lathe.

Powerful 3/4 HP max, 1,725 rpm Motor
Large 12-1/2" swing capacity provides the largest capacity in its class
Easy front panel access to five speed controls (500; 950; 1,550; 2,700 and 4,000) reduces down time
Patented automatic belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life
4 Groove Belt provides superior power to turn large objects
Indexing pin to lock the head stock spindle in 24 different locations for fluting and other decorative applications
Over Headstock On/off switch provides easy in use access
All cast-iron construction provides stability and is extremely durable
With a maximum distance between centers of 16-1/2" the MIDI LATHE® turns objects as long as a chair leg or as short as a thimble. With the bed extension the MIDI LATHE® can turn bed posts, stair spindles, baseball bats.
Ball-bearing live center for smooth turnings
On board storage for easy access to adjustment tools
6" and 10" tool rests provides tool support in a variety of turning applications
Heavy-duty, steel knockout bar

Delta 46-455 12-1/2 Inch 5-Speed Midi Lathe Specifications:

Motor: 3/4 HP max, 120V, 60 HZ, 1 Phase
Motor Control: ON/OFF Switch
Speed: 500; 950; 1,550; 2,700 and 4,000 rpm
Swing Over Bed: 12-1/2 "
Swing Over Base: 9-9/16 "
Distance between Centers: 16-1/2"; with Extension: 42 "
Drive Spindle Thread Count: 1"-8 RH TPI Thread
Drive Spindle through Hole: 15/32 "
Head and Tailstock Taper: #2 MT MT
Tailstock through Hole: 13/32" Self-ejecting "
Tailstock Spindle Travel: 2-1/4" "
Tool Rest: 6" and 10" "
Length: 36 "
Width: 11 "
Height: 17 3/4 "
Weight: 93 lbs
Shipping Weight: lbs

Delta 46-455 includes 6" and 10" Tool Rest, spur center, Chrome 3" Face Plate, tool rest base, Knockout Bar, live center, wrenches.

Jet 321130 BDB-1340A Lathe with NEWALL C80 DRO Installed

Jet 321130 BDB-1340A Lathe with NEWALL C80 DRO Installed

One of Jet's Most popular lathes now comes with an enclosed gearbox which provides smooth, quite operation. This model comes with the Newall C-80 digital readout installed.

Jet 321120 Jet 321130 BDB-1340A Lathe Features:

• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Change gears allow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed deisgn is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feedint and threading are fully interlocked
• Feed selectors travel in grooved ways
• Oil pan included
• Tolerance test certificate included
• 6" 3 jaw direct mount chuck with top reversing jaws
• 8" 4 jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321130 BDB-1340A Lathe Specifications:

• Brand Jet
• Height 45 inch
• Width 32 inch
• Length 71 inch
• Net Weight 975 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 12
• Range of Spindle Speeds (RPM) 60 - 1240
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph
• Prewired 230V

Jet 321121 BDB-1340A Lathe with ACU-RITE 200S DRO Installed

Jet 321121 BDB-1340A Lathe with ACU-RITE 200S DRO Installed

One of Jet's Most popular lathes now comes with an enclosed gearbox which provides smooth, quite operation. This model comes with the Acu-Rite 200T Digital Read Out installed.

Jet 321121 BDB-1340A Lathe Features:

• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Change gears allow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch/metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaws
• 8" 4-jaw chuck
• 12" face place
• Four-way tool post
• Steady and follow reat
• Metric Change
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321120 Jet 321121 BDB-1340A Lathe Specifications:

• Brand Jet
• Height 29.5 inch
• Width 30 inch
• Length 76.5 inch
• Net Weight 1263 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 12
• Range of Spindle Speeds (RPM) 60 - 1240
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads .02 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph
• Prewired 230V

Jet 321120 BDB-1340A-TAK, Lathe with Taper Attachment Installed

Jet 321120 BDB-1340A-TAK, Lathe with Taper Attachment Installed

One of Jet's Most popular lathes now comes with an enclosed gearbox which provides smooth, quite operation. This model comes with the taper attachment installed.

Jet 321120 BDB-1340A-TAK, Lathe Features:

• Enclosed gearbox design provides smooth, quiet operation
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Change gears allow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch/metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321120 BDB-1340A-TAK, Lathe Specifications:

• Brand Jet
• Height 45 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1275 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 12
• Range of Spindle Speeds (RPM) 60 - 1240
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4- 112
• Number of Metric Threads 27
• Range of Metric Threads .02 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5-16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph
• Prewired 230V

Jet 321102AK BDB-1340A, Lathe with CBS-1340A Stand

Jet 321102AK BDB-1340A, Lathe with CBS-1340A Stand

One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature. The enclosed gearbox design provides smooth, quiet operation. The low voltage motor controls and fast, easy speed changes make this BDB-1340A lathe one of a kind. The helical cut headstock gears reduce noise and the spindle is supported by precision tapered roller bearings. The BDB lathe comes equipped in this kit with a CBS-1340A stand to ensure stability when turning.

3Jet 321102AK BDB-1340A Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Change gears allow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-Slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaws
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Centers with headstock center sleeve
• Threading dial
• Toolbox with tools

Jet 321102AK BDB-1340A Lathe with CBS-1340A Stand Specifications:

• Brand Jet
• Height 45 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1055 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 12
• Range of Spindle Speeds (RPM) 60 - 1240
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5-8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph

Jet 321360A BDB-1340A, Belt Drive Bench Metalworking Lathe, 13 Inch Swing 40 Inch Centers, 2HP, 1Ph, 230V Only

The Jet 321360A BDB-1340A, Belt Drive Bench Metalworking Lathe, 13 Inch Swing 40 Inch Centers, 2HP, 1Ph, 230V Only. One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature. Enclosed gearbox design provides smooth, quiet operation. Fast, easy speed changes. Low voltage motor controls. Helical cut headstock gears reduce noise. Changes gears alllow metric threading
Spindle is supported by precision tapered roller bearings. V-way bed is induction hardened and ground. Gap bed section provided for large diameter work. Independent leadscrew and feed rod. T-slotted compound slide with four-way tool post. Carriage mounted spindle control lever. Automatic feeding and threading are fully interlocked. Feed selectors travel in grooved ways. Tailstock may be offset for turning tapers and includes an inch/metric graduated quill. Oil pan included. Tolerance test certificate included. 6" 3-jaw direct mount scroll chuck with top reversing jaws. 8" 4-jaw independent chuck. 12" faceplate. Four-way tool post. Steady and follow rest. Metric change gear. Centers with headstock center sleeve. Threading dial. Tool box with tools.

Jet 321360A BDB-1340A Specifications:

Model Number BDB-1340A
Brand Jet
Overall Dimensions 71 x 32 x 45 with stand
Height 29 inch
Width 29.75 inch
Length 75.5 inch
Net Weight 1175 pound
Gross Weight 1175 pound
Swing over Bed (in.) 13
Swing over Cross Slide (in.) 7-25/32
Swing Through Gap (in.) 18-3/4
Length of Gap (in.) 8
Distance Between Centers (in.) 40
Spindle Bore (in.) 1-3/8
Spindle Mount D1-4
Spindle Taper W/ Sleeve MT-5 (MT-3)
Number of Spindle speeds 12
Range of Spindle Speeds (RPM) 60-1,240
Number of Longitudinal and Cross Feed Rates 40
Range of Longitudinal Feeds (IPR) .0018 - .0374
Range of Cross Feeds (IPR) .0012 -.0345
Number of Inch Threads 40
Range of Inch Threads (TPI) 4-112
Number of Metric Threads 27
Range of Metric Threads 0.2-6
Max Tool Size (in.) 5/8 x 5/8
Compound Slide Travel (in.) 2-11/16
Cross Slide Travel (in.) 6-5/16
Carriage Travel (in.) 35
Tailstock Spindle Travel (in.) 3-3/4
Taper in Tailstock Spindle MT-3
Steady Rest Capacity (in.) 2-5/8
Follow Rest Capacity (in.) 2-3/4
Width of Bed (in.) 7-3/8
Motor 2 HP, 1Ph, 230V
Prewired 230V

Jet 321532 GH-1340W-1 Geared Head Engine Metalworking Lathe with ACU-RITE 200S DRO Installed

Jet 321532 GH-1340W-1 Geared Head Engine Metalworking Lathe with ACU-RITE 200S DRO Installed

Smooth and quiet, JET’s 1340W-1 geared-head engine lathe is designed with hardened and ground gears in the headstock and gearbox for optimal control and longer machine life. The ACU-RITE DRO 200T features an easy-to-read, 14-segment vacuum fluorescent display and a sealed, 3D, tactile-feel, color keypad for precision turning. The headstock is constantly oiled during operation and includes splined, not keyed shafts. The gearbox enables large threading and feeding without changing gears. The D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. The spindle actuation control features inch-metric dials and is apron mounted. An induction-hardened and ground V-way bed offers better command over shaping projects. And, a gap bed section is included for larger diameter pieces. The compound and cross slide have backlash elimination and adjustable glbs are incorporated in the carriage and slideways. The tailstock may be offset for turning tapers and includes an inch-metric graduated quill.

Jet 321532 GH-1340W-1 Geared Head Engine Metalworking Lathe Features:

• Easy-to-red digital readout with tactile-feel, color keypad for precision turning
• 3-horsepower, 1Ph, 230-volt motor for optimal power
• 1-1/2-inch spindle hole
• 13-inch swing by 40-inch centers
• 12 spindle speeds ranging from 40-1800 RPM

Jet 321532 GH-1340W-1 Includes:

• Heavy-duty stand
• 6-inch, 3-Jaw Direct Mount chuck with top reversing jaws
• 8-inch, 4-Jaw chuck
• 12-inch Face plate
• Foot brake
• Coolant system w/splash guard
• Center and headstock center sleeve
• Work lamp
• Spindle jog button
• Tool box and tools
• Digital readout installed

Jet 321124 GHB-1340A, Bench Lathe with Collet Closer

Jet 321124 GHB-1340A, Bench Lathe with Collet Closer

Jet 321124 GHB-1340A, Bench Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is contantly oiled during operation
• Gear box gives wide inch threading and feed capabilities with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• Spindle acuation control is apronmounted
• Compound and cross slide have backlash elimination
• Adjustable gibs are incorporated in the carriage and slideways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaws
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321124 GHB-1340A, Bench Lathe Specifications:

• Brand Jet
• Height 47 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1215 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)`
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - 0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph
• Prewired 230V

Jet 321357A GHB-1340A, 13 Inch Swing 40 Inch Centers, Lathe Cabinet Stand 2HP, 1Ph, 230V only

Jet 321357A GHB-1340A, 13 Inch Swing 40 Inch Centers, Lathe Cabinet Stand 2HP, 1Ph, 230V only

Jet 321357A GHB-1340A Description

Includes 13" x 40" 2 HP 1-Phase Geared Head Bench Lathe - 321357A, 6" 3-Jaw Direct Mount Chuck w/ Top Reversing Jaws, 8" 4-Jaw Chuck, 12" Face Plate, Four-Way Tool Post, Steady &, Follow Rest, Metric Change Gear, Splash Guard, Centers &, Headstock Center Sleeve, Threading Dial, Tool Box &, Tools

Jet 321357A GHB-1340A Features

• 2 HP, 1Ph, 230V motor
• 1 3/8" Spindle Hole
• 13" Swing x 40" Centers
• 8 spindle speeds ranging from 70-2000 RPM

Jet 321538 GH-1340W-1 with ACU-RITE 200S DRO, Geared Head Engine Lathe Taper Attachment and Collet Closer Installed

Jet 321538 GH-1340W-1 with ACU-RITE 200S DRO, Geared Head Engine Lathe Taper Attachment and Collet Closer Installed

Jet 321538 GH-1340W-1 Geared Head Engine Lathe Features:

• Uniquely designed exclusively by JET
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Splined, not keyed, shafts are utilized

Jet 321810 GH-1340W-1, Geared Head Engine Metalworking Lathe 13 Inch Swing 40 Inch Centers, 3HP, 1Ph, 230V Only

Jet 321810 GH-1340W-1, Geared Head Engine Metalworking Lathe 13 Inch Swing 40 Inch Centers, 3HP, 1Ph, 230V Only

Jet 321810 GH-1340W-1 Metalworking Lathe Features:

• 3-Horsepower, 1Ph, 230-Volt motor for optimal turning power
• 1-1/2-Inch spindle hole; 13-Inch swing by 40-Inch centers
• 12 Spindle speeds ranging from 40-1800 RPM for a wide variety of applications
• Hardened and ground gears are featured in the headstock and gearbox

Jet 321159 GHB-1440A Bench Lathe with Collet Closer & TAK

Jet 321159 GHB-1440A Bench Lathe with Collet Closer & TAK

Jet 321159 GHB-1440A Bench Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gear box
• Enclosed gear box design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Gear box gives wide inch threading and feed capabilities with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• Spindle actuation control is apron mounted
• Compound and cross slide have backlash elimination
• Adjustable gibs are incorporated in the carriage and slideways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaws
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321159 GHB-1440A Bench Lathe Specifications:

• Model Number 321159
• Brand Jet
• Height 47 inch
• Width 32 inch
• Length 71 inch
• Net Weight 2300 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - 0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads .02 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph
• Prewired 230V 

Jet 321156K GHB-1440A Bench Lathe with Stand

Jet 321156K GHB-1440A Bench Lathe with Stand

Jet 321156K GHB-1440A Bench Lathe with Stand Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Gearbox gives wide inch threading and feed capabilities with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• Spindle actuation control is apron mounted
• Compound and cross slide have backlash elimination
• Adjustable gibs are incorporated in the carriage and slideways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount scroll chuck with top reversing jaws
• 8" 4-jaw independent chuck
• 12" face plate
• Four-way tool post
• Steady and follow rests
• Metric change gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321156K GHB-1440A Bench Lathe with Stand Specifications:

• Model Number 321107
• Brand Jet
• Height 47 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1050 pound
• Swing over Bed (in.) 14
• Swing over Cross Slide (in.) 8-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2,000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 x 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1Ph
• Prewired 230V 

Jet 321158 GHB-1440A Lathe with VUE DRO

Jet 321158 GHB-1440A with VUE DRO Includes GHB-1440A with VUE DRO - 321158, 6" 3-Jaw Direct Mount Chuck with Top Reversing Jaws, 12" Face Plate, Four-Way Tool Post, Steady and Follow Rest, Metric Change Gear, Splash Guard, Centers and Headstock Center Sleeve, Threading Dial, Tool Box

Jet 321158 GHB-1440A with VUE DRO Features:

• One of the most popular JET lathes now comes with an enclosed gearbox
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings

Jet 321359A GHB-1440A 14 Inch x 40 Inch Gear-Head Bench Lathe

Jet 321359A GHB-1440A 14 Inch x 40 Inch Gear-Head Bench Lathe

Jet 321359A GHB-1440A Bench Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Gearbox gives wide inch threadign and feed capabilities with no gear changes
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• Spindle actuation control is apron mounted
• Compound and cross slide have backlash elimination
• Adjustable gibs are incorporated in the carriage and slideways

Jet 321359A GHB-1440A Bench Lathe Specifications:

• Model Number GHB-1440A
• Brand Jet
• Height 48 inch
• Width 30 inch
• Length 74 inch
• Net Weight 1072 pound
• Swing over Bed (in.) 14
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) 0.0036 - 0.1005
• Range of Cross Feeds (IPR) 0.0012 - 0.0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 x 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 1Ph, 230V
• Prewired 230V

Jet 321115 GHB-1340A Bench Lathe with C80 & TAK

Jet 321115 GHB-1340A Bench Lathe with C80 & TAK

Jet 321115 GHB-1340A Bench Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Gear box gives wide inch threading and feed capabilities with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• Spindle actuation control is apronmounted
• Compound and cross slide have backlash elimination
• Adjustable gibs are incorporated in the carriage and slideways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaw
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321115 GHB-1340A Bench Lathe Specifications:

• Model Number 321115
• Brand Jet
• Height 47 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1250 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5(MT-3)
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2,000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 x 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 1Ph, 230V
• Prewired 230V
• Feature 31 NA
• Feature 32 NA

Jet 321131 GHB-1340A Lathe with NEWALL C80 DRO Installed

Jet 321131 GHB-1340A Lathe with NEWALL C80 DRO Installed

Jet 321131 GHB-1340A Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Gear box gives wide inch threading and feed capabilities with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• Spindle actuation control is apronmounted
• Compound and cross slide have backlash elimination
• Adjustable gibs are incorporated in the carriage and slideways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3 jaw direct mount chuck with top reversing jaws
• 8" 4 jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Splash guard
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet Jet 321131 GHB-1340A Lathe Specifications:

• Brand Jet
• Height 0 inch
• Width 0 inch
• Length 0 inch
• Net Weight 1215 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - 0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph
• Prewired 230V

Jet 321119 GHB-1340A-TAK, Lathe with Taper Attachment Installed

Jet 321119 GHB-1340A-TAK, Lathe with Taper Attachment Installed

Jet 321119 GHB-1340A-TAK, Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly being oiled during operation
• Gearbox gives wide inch threading and feed capabiltites with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for larger diameter work
• Independent leadscrew and feed rod
• Spindle actuation control is apronmounted
• Compound and cross slide have backlash elimination
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaws
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Centers and headstock center sleeve
• Threading dial
• Tool box and tools

Jet 321119 GHB-1340A-TAK, Lathe Specifications:

• Brand Jet
• Height 47 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1285 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 8
• Range of Spindle Speeds (RPM) 70 - 2000
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - 0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads .02 - 6
• Max Tool Size (in.) 5/8 x 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5/8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1Ph
• Prewired 230V

Jet 321401 GH-1340W-1 GEARED HEAD ENGINE LATHE with ACU-RITE VUE DRO(TEXT)

Jet 321401 GH-1340W-1 GEARED HEAD ENGINE LATHE with ACU-RITE VUE DRO(TEXT)

Jet 321401 GH-1340W-1 LATHE Features:

• Uniquely designed exclusively by JET
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Splined, not keyed, shafts are utilized in the headstock

Jet 321146 GH-1340W-1 Lathe with VUE DRO & Collet Closer

Jet 321146 GH-1340W-1 Lathe with VUE DRO & Collet Close

Jet 321146 GH-1340W-1 Lathe Features:

• Uniquely designed exclusively by JET®,
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings
• Headstock is constantly oiled during operation
• Splined, not keyed, shafts are utilized