Delta DP350 12 Inch Variable-Speed Bench Drill Press

The Delta DP350 12 Inch Variable-Speed Bench Drill Press.

1/3 HP Induction Motor for Long-Lasting, Smooth Performance
Pivoting motor mount maintains correct belt tension and facilitates speed changes
Three-spoke pilot wheel for operator convenience
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
Tilting table with slots for fast clamping of work
Standard 3-jaw, 1/2" capacity chuck for positive gripping of various drill press cutting tools

Delta DP350 12 Inch Variable-Speed Bench Drill Press Specifications:

Size: 12"
Motor: 1/3 HP, 120V, 1 Phase, 60 Hz
Motor Control: Push Button Switch
Speeds: Variable: 500-3,100 rpm
Table Size: 8-1/2"x9-7/8 "
Table Tilt: L and R: 90° °
Table Insert: NA
Column Diameter: 2-3/8 "
Spindle Taper: Jacobs 33
Chuck Taper: Jacobs 33
Quill Diameter: 1-1/2 "
Quill Stroke: 3-1/4 "
Key Chuck Capacity: 1/2 "
Chuck to Table Capacity: 14-1/8 "
Chuck to Base Capacity: 19 "
Height: 22 "
Width: 11 "
Depth: 37 "
Weight: 78 lbs
Shipping Weight: 110 lbs

Delta DP350 includes 1/3 HP, 120V Motor, tilting table, table raising mechanism, 1/2" Capacity Chuck and Key, belt and pulleys, light.

Delta DP300L 12 Inch Crosshair Laser Drill Press

The Delta DP300L 12 Inch Crosshair Laser Drill Press.

Flexible lamp provides extra light to the work surface
Durable, textured plastic, 11" diameter tray keeps tools within reach; swings out of the way when necessary
Industrial induction motor for long-lasting, smooth performance
Bright laser crosshairs clearly indicate the drill point
Tilting table for angular drilling, with sides ledges and slots for fast clamping work
Five speeds for drilling a wide variety of woods, plastics and metals
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
9V battery needed for crosshair lasers (battery not included)

Delta DP300L 12 Inch Crosshair Laser Drill Press Specifications:

Motor: 1/3 HP, 120V, 60 Hz, 1 Phase, 1,725 rpm
Motor Control: On/Off Toggle Switch
Speeds: 5 (620; 1,100; 1,720; 2,340; 3,100 rpm)
Table Size: 8-1/2"x9-7/8 "
Table Tilt: With C-clamp edge and parallel slots °
Table Insert: NA
Column Diameter: 2-3/8 "
Spindle Taper: Jacobs 33
Chuck Taper: Jacobs 33
Quill Diameter: 1-1/2 "
Quill Stroke: 2-3/8 "
Key Chuck Capacity: 1/2 "
Chuck to Table Capacity: 14-1/8 "
Chuck to Base Capacity: 19 "
Height: 32 "
Width: 18 "
Depth: 13 "
Weight: 78 lbs
Shipping Weight: 85 lbs

Delta DP300L includes 120V, 60 Hz, 1,720 rpm Induction Motor, fully adjustable laser pod, drill press utility tray, flexible lamp, tilting table, adjustable, locking depth stop, rack and pinion table raising/lowering mechanism, 1/2" Capacity Chuck and Key, belt and pulleys, column and base stand.

Delta 17-959L 17 Inch Laser Drill Press

The Delta 17-959L 17 Inch Laser Drill Press.

Fully adjustable laser pod projects a crosshair on the work piece to indicate the location of bit contact
Large, redesigned base helps promote greater tool stability
Woodworker's table has a removable insert for through drilling with large bits and accommodates sanding drums as well
Unique table is designed to eliminate auxiliary fixtures by tilting left, right and forward
Large quill stroke capacity allows users to drill a variety of demanding operations
Heavy-duty 3/4 HP motor provides ample power for demanding applications
Largest in class cast-iron head provides smooth drilling with minimal vibration
Integrated task light provides improved visibility in the drilling area

Delta 17-959L 17 Inch Laser Drill Press Specifications:

Size: 17"
Motor: 3/4 HP, 120/240V (Wired 120V), 1 Phase, 60 Hz
Motor Control: On/Off Push Button
Speeds: 16 (215-2,750 rpm)
Table Size: 18"x14 "
Table Tilt: L and R: 0-90°; Forward: 0-45° °
Table Insert: 3-3/4"x3-3/4"
Column Diameter: 3.15 "
Spindle Taper: #2 Morse Taper
Chuck Taper: Jacobs 3
Quill Diameter: 1-3/4 "
Quill Stroke: 4-7/8 "
Key Chuck Capacity: 5/8 "
Chuck to Table Capacity: 24-1/2 "
Chuck to Base Capacity: 44-1/2 "
Height: 70 "
Width: 18 "
Depth: 28 "
Weight: 238 lbs
Shipping Weight: 268 lbs

Delta 17-959L includes 3/4 HP Induction Motor, 5/8" Chuck, laser pod, 12mm allen wrench, 5mm Allen Wrench, 4mm Allen Wrench, 3mm Allen Wrench, Drift key.

Delta 17-950L 16-1/2 Inch Crosshair Laser Drill Press

The Delta 17-950L 16-1/2 Inch Crosshair Laser Drill Press.

Flexible lamp provides extra light to the work surface
Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling
Bright laser crosshairs clearly indicate the drill point
9V battery needed for crosshair lasers (battery not included)
14"x18" woodworker-friendly table includes T-Slots, a removable insert and tilts 0-45° forward and 0-90° left and right with positive stops at 0°, 45°, and 90°
Industrial induction motor for long-lasting, smooth performance
Twelve speeds for drilling a wide variety of woods, plastics and metals
Three-spoke pilot wheel for operator convenience

Delta 17-950L 16-1/2 Inch Laser Drill Press Specifications:

Size: 16.5"
Motor: 1/2 HP, 120V, 1 Phase, 60 Hz, 1,720 rpm
Motor Control: On/Off Toggle
Speeds: 12 (250; 360; 410; 540; 590; 650; 1,090; 1,280; 1,450; 1,820; 2,180; 3,000 rpm)
Table Size: 18"x14 "
Table Tilt: L and R: 0-90°; Forward: 0-45° °
Table Insert: 3-3/4"x3-3/4"
Column Diameter: 3.15 "
Spindle Taper: #2 Morse Taper
Chuck Taper: Jacobs 3
Quill Diameter: 2 "
Quill Stroke: 3-7/8 "
Key Chuck Capacity: 5/8 "
Chuck to Table Capacity: 27 "
Chuck to Base Capacity: 47 "
Height: 66 "
Width: 12.75 "
Depth: 25.25 "
Weight: 194 lbs
Shipping Weight: 209 lbs

Delta 17-950L includes 1/2 HP, 120V, 1 Phase, 60 Hz, 1,720 rpm, fully adjustable laser pod, flexible lamp, tilting table, adjustable, locking depth stop, rack and pinion table raising/lowering mechanism, 5/8" Capacity Chuck and Key, belt and pulleys, column and base stand.

Delta 15-344 15 Inch Production Drill Presses

The Delta 15-344 15 Inch Production Drill Presses.

Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling...PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials, an extra-fast speed for working soft materials or an optimum speed for any size bit material
Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a "snubber" feature, holds speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.

Delta 15-344 15 Inch Production Drill Presses Specifications:

Size: 15"
Motor: 3 Phase, 3/4 HP
Motor Control: 24V Push-Button Station, Magnetic Starter, Transformer and 3-Leg Overload Protection (LVC)
Speeds: With 1,725 rpm motor: 450-4,700 rpm
With 1,140 rpm motor: 300-3,100 rpm
Table Size: Standard: 11"x14" (279x356mm)
Production (overall): 15-1/2"x21-1/2" (394x546mm
Production (inside of collant trough): 12"x18" (305x457mm) "
Table Tilt: 90° L and R °
Table Insert:
Column Diameter: 2-3/4" (70mm) "
Spindle Taper:
Chuck Taper:
Quill Diameter: 2" (51mm) "
Quill Stroke: 6" (152mm) "
Key Chuck Capacity: (With Std. Jacobs #33 Taper) 1/2" (13mm) "
Chuck to Table Capacity: "
Chuck to Base Capacity: "
Height: "6 PLUS 6 71-1/2" (1816mm)
VS6: 74" (1880mm) "
Width: Tilting ble: 15-1/2" (394mm)
21-1/2" (546mm) "
Depth: "
Weight: 300 lbs (136 kg) lbs
Shipping Weight: lbs

Delta 15-344 15-344 includes motor and controls, belt and pulley guard, belt and motor pulley (supplied with 5/8" bore unless 1/2" bore is specified), self-locking depth stop, Depth gauge, 65-104 Self-Ejecting Chuck Key, Instruction Manual.

Delta 15-343 15 Inch Variable Speed Production Floor Drill Press

The Delta 15-343 15 Inch Variable Speed Production Floor Drill Press.

3/4 HP single-phase motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you'll always have full power transmission. Features: Extra-large spindle bearings and spindle pulleys that are supported by lubricated-for-life ball bearings Quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs Snubber feature holds speed settings constant no matter the load conditions. Table tilts 90 degrees in both directions What's in The Box: Delta 15-343 15-inch Variable Speed Production Floor Drill Press Self-Ejecting Chuck Key Self-Locking Depth Stop Depth Gauge.

Delta 15-341 15 Inch Variable Speed Drill Press

The Delta 15-341 15 Inch Variable Speed Drill Press.

Extra-large spindle bearings -inch6 PLUS 6-inch and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the plunger that restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling...PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-334 15 Inch Variable Speed Drill Press

The Delta 15-334 15 Inch Variable Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-333 15 Inch Variable Speed Drill Press

The Delta 15-333 15 Inch Variable Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6- and -VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-331 15 Inch Variable Speed Drill Press

The Delta 15-331 15 Inch Variable Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-263 15 Inch 6 Speed Drill Press

The Delta 15-263 15 Inch 6 Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-262 15 Inch 6 Speed Drill Press

The Delta 15-262 15 Inch 6 Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-261 15 Inch 6 Speed Drill Press

The Delta 15-261 15 Inch 6 Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio.

Delta 15-234 15 Inch 6 Speed Drill Press

The Delta 15-234 15 Inch 6 Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6-inch and VS6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate.
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling...PLUS, the extra stroke required for clearing jigs and fixtures
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-233 15 Inch Floor Drill Press

The Delta 15-233 15 Inch Floor Drill Press.

Extra-large spindle bearings PLUS 6-inch and VS 6-inch spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio.
Quick belt tension release.
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 4256001,1002,0503,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Delta 15-232 15 Inch 6 Speed Drill Press

The Delta 15-232 15 Inch 6 Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter.
Wide, test-proven speed range gives a true 10-to-1 speed ratio.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio

Delta 15-231 15 Inch 6 Speed Drill Press

The Delta 15-231 15 Inch 6 Speed Drill Press.

Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four oversized, preloaded, lubricated-for-life ball bearings.
Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.
Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tension
Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.
Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.

Milwaukee 4297-1 No. 3 MT Motor for Electromagnetic Drill Press

The Milwaukee 4297-1 No. 3 MT Motor for Electromagnetic Drill Press is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a No.3 Morris Taper Chuck. This two speed unit has 250 and 500 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.

1-1/4 inch capacity, 11.5 amp motor, 500/250 RPM
Dual Mount Gear Case/Reverse Mount for tight quarter drilling
Taps up to 1 inch-14 threaded hole
Develops up to 1600 pounds of drill point pressure with a 1 inch steel plate

Voltage 120 AC Only
Amps 11.5
Drill Capacity 1-1/4"
No Load RPM 500/250
Chuck or Taper No. 3MT
Tap Capacity 1"-14
Drill Point Pressure 1,530/1,600 lbs
Tool Weight 23.0 lbs
Shipping Weight 25.0 lbs

Milwaukee 4292-1 No. 3 MT Motor for Electromagnetic Drill Press

The Milwaukee 4292-1 No. 3 MT Motor for Electromagnetic Drill Press is built for production drilling and will take the toughest drilling jobs. Model 4292-1 features an 11.5 amp motor with a No.3 Morris Taper Chuck. This two speed unit has 375 and 750 rpm, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is to large.

1-1/4 inch capacity, 11.5 amp motor, 750/375 RPM
Dual Mount Gear Case/Reverse Mount for tight quarter drilling
Taps up to 1 inch-14 threaded hole
Develops up to 1600 pounds of drill point pressure with a 1 inch steel plate

Voltage 120 AC Only
Amps 11.5
Drill Capacity 1-1/4"
No Load RPM 750/375
Chuck or Taper No. 3MT
Tap Capacity 1"-14
Drill Point Pressure 1,530/1,600 lbs
Tool Weight 23.0 lbs
Shipping Weight 25.0 lbs

Milwaukee 4270-21 Compact Electromagnetic Drill Press Kit

The Milwaukee 4270-21 Compact Electromagnetic Drill Press Kit is a great choice. The entire tool weighs just 26-1/2 pounds and has a comfortable carrying handle well positioned for balance, with cutter wrenches stored on-board. This is a very portable machine. However, power was not sacrificed for portability. This drill press includes a very powerful 1.1 maximum horsepower, 9.0 amp motor. It can drill up to 1-1/2 in. diameter holes through 2 in. thick steel with annular cutters, or 1/2 in. diameter holes 4-1/4 in. deep with twist drill bits. The tool is setup to accept standard 3/4 in. Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist drill bits. The strong two-coil magnet provides 2,300 lbs. of deadlift force on 1 in. thick steel. The simple two-button control panel is located on the back, away from feed handle obstruction. The feed handle can be conveniently relocated to the opposite side without the use of tools.

Powerful 9.0 amp 1.1 max HP motor
Light weight, only 26.5 lbs. with comfortable carrying handle
Capacity to cut up to 1-1/2 in. diameter holes thru 2 in. steel with annular cutters, or 1/2 in. diameter holes, 4-1/4 in. deep with twist drill bits
Strong two-coil magnet
Two positions for feed handle - relocate without tools
Simple two-button control panel - unobstructed by feed handle

Voltage 120 AC
Amps 9.0
Drill Capacity 1/2"
No Load RPM 450
Electronic Feedback Yes
Cord Type 8' Fixed
Construction Type Grounded
Tap Capacity --
Drill Point Pressure 750 lbs
Adjustable Base No
Drill Travel 6.6"
Chuck or Taper Weldon
Tool Weight 26.5 lbs
Shipping Weight 35.8 lbs