Grizzly G0443 1-1/2 HP Cyclone Dust Collector

Grizzly G0443 1-1/2 HP Cyclone Dust Collector The cartridge filter is pleated to provide 96 square feet of surface area for efficient air movement and a clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance. Casters mounted to the drum also make disposal of the larger chips & dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11GA steel blower housing, 16GA steel cyclone body, 360° blower rotation for easy connection to a duct system & a TEFC Class "F" motor. The optional steel legs & support frame(H7508) makes setup quick & easy.

Grizzly G0443 1-1/2 HP Cyclone Dust Collector Specifications:

Intake hole size: 6"
Bag material: Plastic
Impeller size: 12-1/2" steel, riveted
Suction capacity: 1025 CFM @ 2.6" SP
Maximum static pressure (inches of water): 10.3"
Filter: 99.9% efficiency captures 0.2-2 micron dust particles
Filter surface area: 96 sq ft
Collection Drum: 35 gallons
Overall dimensions: 55-1/2" wide x 36-1/4" deep x 87-1/2"" high
Motor: TEFC Class "F", 1-1/2 HP, single-phase, 110/220V pre-wired 110V
Amps: 18.8/9.4
Cycle/RPM: 60 Hertz/3450 RPM
Switch: On/Off push button magnetic switch w/remote control devise
Approximate shipping weight: 313 lbs.

Grizzly G0442 5 HP Cyclone Dust Collector

Grizzly G0442 5 HP Cyclone Dust Collector heavy dust particles from the fine particles and drops them into the 55-gallon steel drum. The fine dust travels past the 16" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size.

Grizzly G0442 5 HP Cyclone Dust Collector Specifications:

Intake hole size:10" with 8" adapter
Bag material: Plastic
Impeller size: 16" steel
Suction capacity: 2184 CFM @ 1.9" SP
Maximum static pressure (inches of water): 14.0"
Filter: 99.9% efficiency captures 0.2-2 micron dust particles
Filter surface area: 215 sq. ft.
Collection Drum: 55 gallons
Overall dimensions: 63" wide x 56-7/8 deep x 113" high
Motor: TEFC Class "F", 5 HP, single-phase, 220V
Amps: 22.4
Cycle/RPM: 60 Hertz/3450 RPM
Switch: Magnetic with remote control device
Approximate shipping weight: 660 lbs.

Grizzly G0441 3 HP Cyclone Dust Collector

Grizzly G0441 3 HP Cyclone Dust Collector Casters mounted to the drum also make disposal of the larger chips and dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11 gauge steel blower housing, 14 gauge steel cyclone body, 360° blower rotation for easy connection to a duct system, TEFC Class "F" motor and a magnetic switch with remote control device. The optional steel legs and support frame (H7509) also make setup quick and easy.

Grizzly G0441 3 HP Cyclone Dust Collector Specifications:

Motor: TEFC Class "F", 3 HP, 220V, single-phase
Switch: Remote controlled magnetic
Intake hole size: 8"
Bag material: Plastic
Impeller size: 15-1/2" steel, riveted
Air suction capacity: 1654 CFM @ 2.0" SP
Maximum static pressure (inches of water): 14.2"
Filter: 99.9% efficiency captures 0.2-2 micron dust particles
Filter surface area: 113 sq. ft.
Collection Drum: 55 gallons
Overall dimensions: 60-1/4" wide x 38-3/8" deep x 93-1/4" high
Base construction: Pre-formed steel
Approximate shipping weight: 421 lbs.

Grizzly G0440 2 HP Cyclone Dust Collector

Grizzly G0440 2 HP Cyclone Dust Collector fine dust travels past the 14-1/2" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size. The cartridge filter is pleated to provide 96 square feet of surface area for efficient air movement and a clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance. Casters mounted to the drum also make disposal of the larger chips and dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11GA steel blower housing, 16GA steel cyclone body, 360° blower rotation for easy connection to a duct system, TEFC Class "F" motor, magnetic switch, and a remote control. The optional steel legs and support frame (H7499) also make setup quick and easy.

Grizzly G0440 2 HP Cyclone Dust Collector Specifications:

Intake hole size: 7"
Bag material: Plastic
Impeller size: 14-1/2" steel, riveted
Suction capacity: 1354 CFM @ 2.5" SP
Maximum static pressure (inches of water): 10.4"
Filter: 99.9% efficiency captures 0.2-2 micron dust particles
Filter surface area: 96 sq. ft.
Collection Drum: Steel, 35 gallons
Overall dimensions: 59" wide x 37-3/4" deep x 93 -1/4" high
Motor: TEFC Class "F", 2 HP, single-phase, 220V
Amps: 12.5
Cycle/RPM: 60 Hertz/3450 RPM
Switch: Magnetic with remote control device
Approximate shipping weight: 352 lbs.

Powermatic 1792074K PM1900TX-CK3 Dust Collector 3HP 3PH 230/460V, 2-Micron Canister Kit

Powermatic 1792074K PM1900TX-CK3 Dust Collector 3HP 3PH 230/460V, 2-Micron Canister Kit is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Powermatic 1792074K PM1900TX-CK3 Dust Collector Specifications:

Part Number 1792074K
Trademark TurboCone
Remote Control No
Sound Rating 75 - 90 dB
1-Hose Connection Diameter 8 "
2-Hoses Connection Diameter 4 "
3-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 26 "
Collection Bag Capacity 10 cubic foot
Collection Bag Length 30 "
Air Flow @ 4" 236 cu.ft/min
Air Flow @ 8" 1,782 cu.ft/min
Static Pressure 11.31 inch of water
Particle Size (Micron) 86% of 1 micron particles; 98% of 2 micron particles
Velocity @ 4" 5,200 foot per minute
Air Inlet (1) at 8" or (3) at 4"
Impeller Diameter 14 "
Impeller Fins 7
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 3 HP
Motor Phase 3 Ph
Motor Voltage 230 / 460 V
Prewired Voltage 230 V
Motor Current 8.2 / 4.1 A
Web Description PM1900TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit
Model Number PM1900TX-CK3
Brand Powermatic
Overall Dimensions 46 x 23 x 45 (shipped), 61 x 30 x 72 (assembled)
Height 45 inch
Width 23 inch
Length 46 inch
Net Weight 264 pound

Powermatic 1792073K PM1900TX-BK3 Dust Collector 3HP 3PH 230/460V, 30-Micron Bag Filter Kit

Powermatic 1792073K PM1900TX-BK3 Dust Collector 3HP 3PH 230/460V, 30-Micron Bag Filter Kit is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Powermatic 1792073K PM1900TX-BK3 Dust Collector Specifications:

Part Number 1792073K
Trademark TurboCone
Remote Control No
Sound Rating 75 - 90 dB
1-Hose Connection Diameter 8 "
2-Hoses Connection Diameter 4 "
3-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 48 "
Collection Bag Capacity 10 cubic foot
Collection Bag Length 30 "
Air Flow @ 4" 234 cu.ft/min
Air Flow @ 8" 1,754 cu.ft/min
Static Pressure 11.31 inch of water
Particle Size (Micron) 96% of 30 micron particles
Velocity @ 4" 5,200 foot per minute
Air Inlet (1) at 8" or (3) at 4"
Impeller Diameter 14 "
Impeller Fins 7
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 3 HP
Motor Phase 3 Ph
Motor Voltage 230 / 460 V
Prewired Voltage 230 V
Motor Current 8.2 / 4.1 A
Web Description PM1900TX-BK3 Dust Collector, 3HP 3PH 230/460V, 30-Micron Bag Filter Kit
Model Number PM1900TX-BK3
Brand Powermatic
Overall Dimensions 46 x 23 x 28 (shipped), 61 x 30 x 94 (assembled)
Height 28 inch
Width 23 inch
Length 46 inch
Net Weight 207 pound

Powermatic 1792072K PM1900TX-CK1 Dust Collector 3HP 1PH 230V, 2-Micron Canister Kit

Powermatic 1792072K PM1900TX-CK1 Dust Collector 3HP 1PH 230V, 2-Micron Canister Kit features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Powermatic 1792072K PM1900TX-CK1 Dust Collector Specifications:

Part Number 1792072K
Trademark TurboCone
Remote Control Yes
Sound Rating 75 - 90 dB
1-Hose Connection Diameter 8 "
2-Hoses Connection Diameter 4 "
3-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 26 "
Collection Bag Capacity 10 cubic foot
Collection Bag Length 30 "
Air Flow @ 4" 236 cu.ft/min
Air Flow @ 8" 1,782 cu.ft/min
Static Pressure 11.31 inch of water
Particle Size (Micron) 98% of 2 micron particles: 86% of 1 micron particles
Velocity @ 4" 5,200 foot per minute
Air Inlet (1) at 8" or (3) at 4"
Impeller Diameter 14 "
Impeller Fins 7
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 3 HP
Motor Phase 1 Ph
Motor Voltage 230 V
Prewired Voltage 230 V
Motor Current 15 A
Web Description PM1900TX-CK1 Dust Collector, 3HP 1PH 230V, 2-Micron Canister Kit
Model Number PM1900TX-CK1
Brand Powermatic
Overall Dimensions 46 x 23 x 45 (shipped), 61 x 30 x 72 (assembled)
Height 45 inch
Width 23 inch
Length 46 inch
Net Weight 268 pound

Powermatic 1792071K PM1900TX-BK1 Dust Collector 3HP 1PH 230V, 30-Micron Bag Filter Kit

Powermatic 1792071K PM1900TX-BK1 Dust Collector 3HP 1PH 230V, 30-Micron Bag Filter Kit is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bags. The canister filter offers over six times the filtering area of standard filter bags, collects 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. Multiple connection port capability makes this machine a central dust collection system for the entire woodworking shop. Four swivel casters and conveniently located handles allow for easy mobility.

Powermatic 1792071K PM1900TX-BK1 Dust Collector Specifications:

Part Number 1792071K
Trademark TurboCone
Remote Control Yes
Sound Rating 75 - 90 dB
1-Hose Connection Diameter 8 "
2-Hoses Connection Diameter 4 "
3-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 48 "
Collection Bag Capacity 10 cubic foot
Collection Bag Length 30 "
Air Flow @ 4" 234 cu.ft/min
Air Flow @ 8" 1,754 cu.ft/min
Static Pressure 11.31 inch of water
Particle Size (Micron) 96% of 30 micron particles
Velocity @ 4" 5,200 foot per minute
Air Inlet (1) at 8" or (3) at 4"
Impeller Diameter 14 "
Impeller Fins 7
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 3 HP
Motor Phase 1 Ph
Motor Voltage 230 V
Prewired Voltage 230 V
Motor Current 15 A
Web Description PM1900TX-BK1 Dust Collector, 3HP 1PH 230V, 30-Micron Bag Filter Kit
Model Number PM1900TX-BK1
Brand Powermatic
Overall Dimensions 46 x 23 x 28 (shipped), 61 x 30 x 94 (assembled)
Height 28 inch
Width 23 inch
Length 46 inch
Net Weight 211 pound

Powermatic 1791079K PM1300TX-CK Dust Collector 1.75HP 1PH 115/230V, 2-Micron Canister Kit

Powermatic 1791079K PM1300TX-CK Dust Collector 1.75HP 1PH 115/230V, 2-Micron Canister Kit features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canister filter offers superior filtering surface area over standard bags, and captures 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. The clear collector bags are large capacity, which means less down-time changing them. Four swivel casters and conveniently located handles allow for easy mobility.

Powermatic 1791079K PM1300TX-CK Dust Collector Specifications:

Part Number 1791079K
Trademark TurboCone
Remote Control Yes
Sound Rating 75 - 90 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 26 "
Collection Bag Capacity 10 cubic foot
Collection Bag Length 30 "
Air Flow @ 6" 1,064 cu.ft/min
Static Pressure 11.31 inch of water
Particle Size (Micron) 98% of 2 micron particles: 86% of 1 micron particles
Velocity @ 6" 5,374 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 12 "
Impeller Fins 6
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 1¾ HP
Motor Phase 1 Ph
Motor Voltage 115 / 230 V
Prewired Voltage 115 V
Motor Current 15 / 7.5 A
Web Description PM1300TX-CK Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit
Model Number PM1300TX-CK
Brand Powermatic
Overall Dimensions 45 x 23 x 30 (shipped), 37 x 29 x 72 (assembled)
Height 30 inch
Width 23 inch
Length 45 inch
Net Weight 154 pound

Powermatic 1791078K PM1300TX-BK Dust Collector 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit

Powermatic 1791078K PM1300TX-BK Dust Collector, 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The cloth filter bag is made of a 30 micron material which aids in the filtration of all but the finest dust particles, and the large capacity collection bag reduces the number of bag changes. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. Four swivel casters and conveniently located handles allow for easy mobility.

Powermatic 1791078K PM1300TX-BK Dust Collector Specifications:

Part Number 1791078K
Remote Control Yes
Sound Rating 75 - 90 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 48 "
Collection Bag Capacity 10 cubic foot
Collection Bag Length 30 "
Air Flow @ 6" 1,064 cu.ft/min
Static Pressure 11.31 inch of water
Particle Size (Micron) 96% of 30 micron particles
Velocity @ 6" 5,374 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 12 "
Impeller Fins 6
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 1¾ HP
Motor Phase 1 Ph
Motor Voltage 115 / 230 V
Prewired Voltage 115 V
Motor Current 15 / 7.5 A
Web Description PM1300TX-BK Dust Collector, 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit
Model Number PM1300TX-BK
Brand Powermatic
Overall Dimensions 45 x 23 x 23 (shipped), 37 x 29 x 79 (assembled)
Height 23 inch
Width 23 inch
Length 45 inch
Net Weight 127 pound

Jet 710704K DC-1200VX-CK3 Dust Collector 2-Micron Canister Kit

Jet 710704K DC-1200VX-CK3 Dust Collector 2HP 3PH 230/460-Volt 2-Micron Canister Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop.

Jet 710704K DC-1200VX-CK3 Dust Collector Specifications:

Model Number DC-1200VX-CK3
Brand Jet
Trademark Vortex Cone
Overall Dimensions 37.5 x 22.5 x 39 (shipped), 34 x 20.5 x 79 (assembled)
Height 39 inch
Width 22.5 inch
Length 37.5 inch
Net Weight 170 pound
Gross Weight 183 pound
Remote Control n.a.
Sound Rating 80 - 85 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 25"
Collection Bag Capacity 5.3 cubic foot
Collection Bag Length 29 "
Air Flow @ 4" 1,200 cu.ft/min
Static Pressure 11½ inch of water
Particle Size (Micron) 98% of 2 micron particles: 86% of 1 micron particles
Velocity @ 4" 13,745 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 12 "
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 2 HP
Motor Phase 3 Ph
Motor Voltage 230 / 460 V
Prewired Voltage 230 V
Motor Current 6 / 3 A

Jet 710703K DC-1200VX-BK3 Dust Collector 30-Micron Bag Filter Kit

Jet 710703K DC-1200VX-BK3 Dust Collector 2HP 3PH 230/460-Volt 30-Micron Bag Filter Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop.

Jet 710703K DC-1200VX-BK3 Dust Collector Specifications:

Model Number DC-1200VX-BK3
Brand Jet
Trademark Vortex Cone
Overall Dimensions 37.5 x 22.5 x 22 (shipped), 34 x 20.5 x 79 (assembled)
Height 22 inch
Width 22.5 inch
Length 37.5 inch
Net Weight 138 pound
Gross Weight 150 pound
Remote Control n.a.
Sound Rating 80 - 85 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 32"
Collection Bag Capacity 5.3 cubic foot
Collection Bag Length 29 "
Air Flow @ 4" 1,200 cu.ft/min
Static Pressure 11½ inch of water
Particle Size (Micron) 96% of 30 micron particles
Velocity @ 4" 13,745 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 12 "
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 2 HP
Motor Phase 1 Ph
Motor Voltage 230 / 460 V
Prewired Voltage 230 V
Motor Current 6 / 3 A

Jet 710701K DC-1200VX-BK1 Dust Collector 30-Micron Bag Filter Kit

Jet 710701K DC-1200VX-BK1 Dust Collector 2HP 1PH 230-Volt 30-Micron Bag Filter Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop.

Jet 710701K DC-1200VX-BK1 Dust Collector Specifications:

Model Number DC-1200VX-BK1
Brand Jet
Trademark Vortex Cone
Overall Dimensions 37.5 x 22.5 x 22 (shipped), 37 x 22 x 79 (assembled)
Height 22 inch
Width 22.5 inch
Length 37.5 inch
Net Weight 138 pound
Gross Weight 150 pound
Remote Control n.a.
Sound Rating 80 - 85 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 32"
Collection Bag Capacity 5.3 cubic foot
Collection Bag Length 29 "
Air Flow @ 4" 1,200 cu.ft/min
Static Pressure 11½ inch of water
Particle Size (Micron) 96% of 30 micron particles
Velocity @ 4" 13,745 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 12 "
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 2 HP
Motor Phase 1 Ph
Motor Voltage 230 V
Prewired Voltage 230 V
Motor Current 8 A

Jet 708659K DC-1100VX-CK Dust Collector 2-Micron Canister Kit

Jet 708659K DC-1100VX-CK Dust Collector 1.5HP 1PH 115/230-Volt 2-Micron Canister Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop.

Jet 708659K DC-1100VX-CK Dust Collector Specifications:

Model Number DC-1100VX-CK
Brand Jet
Trademark Vortex Cone
Overall Dimensions 37 x 22.5 x 39 (shipped), 37 x 22.5 x 72 (assembled)
Height 39 inch
Width 22.5 inch
Length 37 inch
Net Weight 159 pound
Gross Weight 172 pound
Remote Control n.a.
Sound Rating 70 - 80 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 25"
Collection Bag Capacity 5.3 cubic foot
Collection Bag Length 29 "
Air Flow @ 4" 1,100 cu.ft/min
Static Pressure 10½ inch of water
Particle Size (Micron) 98% of 2 micron particles: 86% of 1 micron particles
Velocity @ 4" 12,571 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 11 "
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 1½ HP
Motor Phase 1 Ph
Motor Voltage 115 / 230 V
Prewired Voltage 115 V
Motor Current 11 / 5.5 A

Jet 708658K DC-1100VX-5M Dust Collector 5-Micron Bag Filter Kit

Jet 708658K DC-1100VX-5M Dust Collector 1.5HP 1PH 115/230-Volt 5-Micron Bag Filter Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The filter bag captures up to 98% of 5-micron particles. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have a snap ring for fast installation and removal. Casters offer maneuverability within the shop.

Jet 708658K DC-1100VX-5M Dust Collector Specifications:

Model Number DC-1100VX-5M
Brand Jet
Trademark Vortex Cone
Overall Dimensions 37 x 22.5 x 22 (shipped), 37 x 22.5 x 79 (assembled)
Height 79 inch
Width 22.5 inch
Length 37 inch
Net Weight 130 pound
Gross Weight 143 pound
Remote Control n.a.
Sound Rating 70 - 80 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 32"
Collection Bag Capacity 5.3 cubic foot
Collection Bag Length 30 "
Air Flow @ 4" 1,100 cu.ft/min
Static Pressure 10½ inch of water
Particle Size (Micron) 98% of 5 micron particles; 74% of 1 micron particles
Velocity @ 4" 12,571 foot per minute
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 11 "
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 1½ HP
Motor Phase 1 Ph
Motor Voltage 115 / 230 V
Prewired Voltage 115 V
Motor Current 11 / 5.5 A

Jet 708657K DC-1100VX-BK Dust Collector 30-Micron Bag Filter Kit

Jet 708657K DC-1100VX-BK Dust Collector 30-Micron Bag Filter Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high air velocity (CFM) stands up to any competitive specifications, and the industrial controls are designed for years of durable use. Collection bags have an elastic band for fast installation and removal. Swivel casters offer maneuverability within the shop. Visit http://www.vortexcone.com for more information.

Jet 708657K DC-1100VX-BK Dust Collector Specifications:

Model Number DC-1100VX-BK
Brand Jet
Overall Dimensions 37 x 22.5 x 22 (shipped), 37 x 22.5 x 79 (assembled)
Height 79 inch
Width 22.5 inch
Length 37 inch
Net Weight 127 pound
Gross Weight 139 pound
Remote Control n.a.
Sound Rating 70 - 80 dB
1-Hose Connection Diameter 6 "
2-Hoses Connection Diameter 4 "
Bag Diameter 20 "
Filter Bag/Canister Length 32"
Collection Bag Capacity 5.3 cubic foot
Collection Bag Length 30 "
Air Flow @ 4" 1,100 cu.ft/min
Static Pressure 10½ inch of water
Particle Size (Micron) 96% of 30 micron particles
Air Inlet (1) at 6" or (2) at 4"
Impeller Diameter 11 "
Impeller Material steel
Separator Tank Diameter 20 "
Separator Tank Height 10 "
Motor Power 1½ HP
Motor Phase 1 Ph
Motor Voltage 115 / 230 V
Prewired Voltage 115 V
Motor Current 11 / 5.5 A

Delta 50-850A 1-1/2 HP Motor Dust Collector 1200 CFM with Canister

The Delta 50-850A 1-1/2 HP Motor Dust Collector 1200 CFM with Canister.

Powerful, induction motor for long-lasting, smooth performance; totally enclosed to protect it from damaging dust
6mm plastic collection bags offer large chip capacity and easy disposal
Curved steel impeller produces maximum air velocity for efficient dust collection
Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way
2 micron Pleated Canister Filter Provides 5 Times the Filter Media of a Standard Bag
Exterior handle rotates around canister and agitates the dust off of the inside of the filter to prevent clogging and suction loss
(2) 4" diameter dust intake ports

Delta 50-850A 1-1/2 HP Motor Dust Collector Specifications:

Motor: 1-1/2 HP, 3,450 rpm, 120/240V (Wired 120V), 1 Phase, 60 Hz
Max CFM: 1200 CFM
Max Static Pressure: 11.4 (inches of water)
Impeller Diameter: NA "
Filter Bag Area: Canister: 33.1 sq ft
Standard Bag Filtration: 2 micron
Chip Bag Area: 6.3 cu ft
Length: 27 "
Width: 37 "
Height: 88 "
Weight: 100 lbs
Shipping Weight: 115 lbs

Delta 50-850A includes blower, (1) 2 micron pleated filter, (2) plastic 6 mil chip bags, support drum, (2) 4" diameter dust intake ports, (1) 6' hose, (1) intake port cap, base, (4) swivel caster assemblies, cord and plug, Model 50-750 2 micron canister filter with handle.

Delta 50-850 1-1/2 HP Motor Dust Collector 1200 CFM

The Delta 50-850 1-1/2 HP Motor Dust Collector 1200 CFM.

Powerful, induction motor for long-lasting, smooth performance; totally enclosed to protect it from damaging dust
6mm plastic collection bags offer large chip capacity and easy disposal
Curved steel impeller produces maximum air velocity for efficient dust collection
Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way

Delta 50-850 1-1/2 HP Motor Dust Collector Specifications:

Motor: 1-1/2 HP, 3,450 rpm, 120/240V (Wired 120V), 1 Phase, 60 Hz
Max CFM: 1200 CFM
Max Static Pressure: 11.4 (inches of water)
Impeller Diameter: NA "
Filter Bag Area: 33.1 sq ft
Standard Bag Filtration: 5 micron
Chip Bag Area: 6.3 cu ft
Length: 37 "
Width: 27 "
Height: 88 "
Weight: 86 lbs
Shipping Weight: 91 lbs

Delta 50-850 includes 1-1/2 HP Motor and Blower, (1) 5 micron filtration bag, (1) 6 mil chip bag, support drum, (2) 4" diameter dust intake ports, (1) 6' hose, (1) intake port cap, base, (4) swivel caster assemblies, cord and plug.

Delta 50-765 5 HP Motor Dust Collector 4,800 CFM

The Delta 50-765 5 HP Motor Dust Collector 4,800 CFM.

Standard 1 micron filtration bags keep your shop safer and cleaner
Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. The dust ports and motor housing can be oriented facing up or down.
Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps
6 mil plastic chip collection bags show you when the bags need emptying
Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way

Delta 50-765 5 HP Motor Dust Collector Specifications:

Motor: 5 HP, 3,450 rpm, 230V, 1 Phase, 60 Hz
Max CFM: 4800 CFM
Max Static Pressure: 10.5 (inches of water)
Impeller Diameter: 13.5 "
Filter Bag Area: 140.8 sq ft, 13.08 sq m
Standard Bag Filtration: 1 Micron
Chip Bag Area: 12.4 cu ft, 352 L
Length: 75 "
Width: 26 "
Height: 110 "
Weight: 260 lbs
Shipping Weight: 269 lbs

Delta 50-765 includes motor and blower, support frame, (2) 1 micron filtration bags, (4) 6 mil plastic chip collection bags, (2) snap-in bag rings, (4) 5" intake ports, (4) swivel caster assemblies.

Delta 50-764 5 HP Motor Dust Collector 4,800 CFM

The Delta 50-764 5 HP Motor Dust Collector 4,800 CFM.

Standard 1 micron filtration bags keep your shop safer and cleaner
Powerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust. The dust ports and motor housing can be oriented facing up or down.
Snap-in bag rings are faster, easier and eliminate the need for cam-over-lock style clamps
6 mil plastic chip collection bags show you when the bags need emptying
Sturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way

Delta 50-764 5 HP Motor Dust Collector Specifications:

Motor: 5 HP, 3,450 rpm, 230/460V (Wired 230V), 3 Phase, 60 Hz
Max CFM: 4800 CFM
Max Static Pressure: 10.5 (inches of water)
Impeller Diameter: 13.5 "
Filter Bag Area: 140.8 sq ft, 13.08 sq m
Standard Bag Filtration: 1 Micron
Chip Bag Area: 12.4 cu ft, 352 L
Length: 75 "
Width: 26 "
Height: 110 "
Weight: 260 lbs
Shipping Weight: 269 lbs

Delta 50-764 includes motor and blower, support frame, (2) 1 micron filtration bags, (4) 6 mil plastic chip collection bags, (2) snap-in bag rings, (4) 5" intake ports, (4) swivel caster assemblies.