Jet 354050 J-2350 28 Inch Direct Drive Drill Press 3HP

The Jet 354050 J-2350 28 Inch Direct Drive Drill Press 3HP. Direct drive round column drill press with mechanical clutch. Two speed forward and reverse switch. Mechanical powerfeed clutch engagement
Heavy duty quill and spindle. Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection. Speed and feed selectors are located on one side of the drill head for convenience and ease of operation. Oversized base is precision ground with T-slots for added versatility and stability. Spindle gear box is equipped with steel hardened, ground, shafts and gears. Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation.. Tilting table, 45° left and right. Powerfeed can be disengaged manually. Automatic tool ejector. Manual quill lock. Coolant system. Low voltage at switch.

Jet 354050 J-2350 Specifications:

Model Number J-2350
Brand Jet
Height 46.5 inch
Width 24.5 inch
Length 102 inch
Net Weight 1810 pound
Gross Weight 1840 pound
Motor 3 HP, 230/460V, 3 Ph, Prewired 230V
Number of Spindle speeds 9
Range of Spindle Speeds (RPM) 82, 120, 180, 240, 354, 528, 678, 1026, 1524
Spindle Taper MT-4
Quill Diameter (in.) 3.23
Max Distance Spindle to Table ( in.) 30-1/2
T-Slots Number and Size (in.) 3 x 5/8
Work Table Weight Capacity (lbs.) 400
Base Dimensions (LxWxH/ in.) 102 x 25 x 47
Drilling Capacity Cast Iron (in.) 1-7/8
Drilling Capacity Mild Steel (in.) 1-3/4
Tapping Capacity Cast Iron (in.) 1-3/4
Tapping Capacity Mild Steel (in.) 1-9/16
Quill Travel (in.) 9
Quill Travel w/ Powerfeed engaged (in.) 9
Quill Down feed Rates (IPR) .004, .008, .012, .016
Table Size (in.) 22 x 19
Distance Column to Spindle (in.) 14
Drills to Center of Circle (in) 28
Spindle Distance to Base (in.) 49
Max Distance - Spindle to Table (in) 30-1/2
Spindle Travel (in.) 9
Number of Powerfeeds 4
Base Slots Number & Size (in.) 2 x 5/8
Table Dimensions 22 X 19
Spindle Distance to Table (max./in.) 30-1/2
Spindle Distance to Table (min./in.) 2.67