Jet 354052 J-2380 33 Inch Direct Drive Drill Press 7-1/2HP

The Jet 354052 J-2380 33 Inch Direct Drive Drill Press 7-1/2HP Direct drive round column drill press with mechanical clutch. Two speed forward and reverse switch. Mechanical powerfeed clutch engagement. Heavy duty quill and spindle. Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection. Speed and feed selectors are located on one side of the drill head for convenience and ease of operation. Oversized base is precision ground with T-slots for added versatility and stability. Spindle gear box is equipped with steel hardened, ground, shafts and gears. Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation.. Tilting table, 45° left and right. Powerfeed can be disengaged manually. Automatic tool ejector. Manual quill lock. Coolant system. Low voltage at switch.

Jet 354052 J-2380 Specifications:

Model Number J-2380
Brand Jet
Height 54 inch
Width 33 inch
Length 114 inch
Net Weight 3065 pound
Gross Weight 3200 pound
Motor 7-1/2 HP, 230/460V, 3 Ph, Prewired 230V
Number of Spindle speeds 12
Range of Spindle Speeds (RPM) 42, 58, 86, 116, 154, 249, 304, 412, 554, 748,1098, 1458
Spindle Taper MT-5
Quill Diameter (in.) 3.78
Max Distance Spindle to Table ( in.) 30-1/2
T-Slots Number and Size (in.) 3 x 5/8
Work Table Weight Capacity (lbs.) 400
Base Dimensions (LxWxH/ in.) 114 x 33 x 54
Drilling Capacity Cast Iron (in.) 2-7/8
Drilling Capacity Mild Steel (in.) 2-3/4
Tapping Capacity Cast Iron (in.) 2-3/8
Tapping Capacity Mild Steel (in.) 2-1/8
Quill Travel (in.) 11
Quill Travel w/ Powerfeed engaged (in.) 11
Quill Down feed Rates (IPR) .002, .004, .006, .008, .014, .020
Distance Base to Spindle (in.) 51
Table Size (in.) 23-1/2 x 23-1/2
Distance Column to Spindle (in.) 16-1/2
Drills to Center of Circle (in) 33
Spindle Distance to Base (in.) 51
Swing (in.) 16-1/2
Max Distance - Spindle to Table (in) 30-1/2
Spindle Travel (in.) 11
Auto .002, .004, .006, .008, .014, .020
Number of Powerfeeds 6
Base Slots Number & Size (in.) 2 x 5/8
Table Dimensions 23-1/2 x 23-1/2
Spindle Distance to Table (max./in.) 30-1/2
Spindle Distance to Table (min./in.) 2-3/4