Powermatic 1791267 201HH, 22 Inch Planer, 7.5HP 1PH 230V, helical cutterhead

This 1,300-pound heavy duty cast iron Powermatic 1791267 201HH, 22 Inch Planer, 7.5HP 1PH 230V, helical cutterhead offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 150 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements.

Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
Cast iron 1300 lb. construction for solid performance without vibration
2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
Segmented infeed roller with sectional chipbreaker allows multiple board planing
Roller bearing-mounted feed rollers for long life
Adjustable bed rollers allow smooth feeding of rough or finished workpieces
Oversized cast iron table travels on 2 large lead screws for heavy duty support
Dust chute with 5" port for dust collection
Standard Equipment:
Dust collection port
Adjustable foot pads
Tool kit

Powermatic 1791267 201HH 22 Inch Planer Specifications:

Part Number 1791267
Maximum Planing 22 "
Maximum Planing Thickness 9¼ "
Maximum Depth of Cut 3/16 "
Minimum Planing Length 10 "
Cutterhead Diameter 3¼ "
Cutterhead Speed 4800 RPM
Feed Rate 20 and 30 FPM
Infeed Roller Diameter 3 "
Outfeed Roller Diameter 3 "
Number of Knives 150 Four-sided inserts
Table Size 32 1/4" x 24"
Dust Port Diameter 5 "
Dust Collection Minimum CFM Required 900 cu.ft/min
Blade Size 59/100" x 59/100" x 1/10"
Bed Rollers Adjustable from Front 2"
Segmented Infeed Roller Diameter 3 "
Table Height Adjust Manual 1 Turn = 1/16"
Table Support 2 column
Tool Supplied tool kit
Column Diameter 2½ "
Maximum Height of Rollers Parallel to Tabletop 0.05 "
Number of Speeds 2
Motor Power 7½ HP
Motor Phase 1 Ph
Motor Voltage 230 V
Model Number 201HH
Brand Powermatic
Overall Dimensions 42 x 49 x 59
Height 59 inch
Width 49 inch
Length 42 inch
Net Weight 1350 pound