Jet 321102AK BDB-1340A, Lathe with CBS-1340A Stand

Jet 321102AK BDB-1340A, Lathe with CBS-1340A Stand

One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature. The enclosed gearbox design provides smooth, quiet operation. The low voltage motor controls and fast, easy speed changes make this BDB-1340A lathe one of a kind. The helical cut headstock gears reduce noise and the spindle is supported by precision tapered roller bearings. The BDB lathe comes equipped in this kit with a CBS-1340A stand to ensure stability when turning.

3Jet 321102AK BDB-1340A Lathe Features:

• One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature
• Enclosed gearbox design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Change gears allow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-Slotted compound slide with four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
• Oil pan included
• Tolerance test certificate included
• 6" 3-jaw direct mount chuck with top reversing jaws
• 8" 4-jaw chuck
• 12" face plate
• Four-way tool post
• Steady and follow rest
• Metric change gear
• Centers with headstock center sleeve
• Threading dial
• Toolbox with tools

Jet 321102AK BDB-1340A Lathe with CBS-1340A Stand Specifications:

• Brand Jet
• Height 45 inch
• Width 32 inch
• Length 71 inch
• Net Weight 1055 pound
• Swing over Bed (in.) 13
• Swing over Cross Slide (in.) 7-25/32
• Swing Through Gap (in.) 18-3/4
• Length of Gap (in.) 8
• Distance Between Centers (in.) 40
• Spindle Bore (in.) 1-3/8
• Spindle Mount D1-4
• Spindle Taper W/ Sleeve MT-5 (MT-3)
• Number of Spindle speeds 12
• Range of Spindle Speeds (RPM) 60 - 1240
• Number of Longitudinal and Cross Feed Rates 40
• Range of Longitudinal Feeds (IPR) .0036 - .0325
• Range of Cross Feeds (IPR) .0012 - .0345
• Number of Inch Threads 40
• Range of Inch Threads (TPI) 4 - 112
• Number of Metric Threads 27
• Range of Metric Threads 0.2 - 6
• Max Tool Size (in.) 5/8 X 5/8
• Compound Slide Travel (in.) 2-11/16
• Cross Slide Travel (in.) 6-5/16
• Carriage Travel (in.) 35
• Tailstock Spindle Travel (in.) 3-3/4
• Taper in Tailstock Spindle MT-3
• Steady Rest Capacity (in.) 2-5-8
• Follow Rest Capacity (in.) 2-3/4
• Width of Bed (in.) 7-3/8
• Motor 2HP, 230V, 1 Ph