Milwaukee 5359-21 1-1/8 Inch SDS Drive L-Shape Rotary Hammer

The Milwaukee 5359-21 1-1/8 Inch SDS Drive L-Shape Rotary Hammer 3-mode, grounded hammer is great for mid-size hole drilling (up to 1-1/8" diameter) in concrete. The D-style rear handle offers the operator a secure comfortable grip and a two-finger speed control trigger switch. Speed control allows smooth controlled starts and less bit walk for accurate hole positioning. The hammer accepts SDS style bits up to 1-1/8 in. diameter. It can drill up to 3-1/2 in. holes in concrete using thin wall Core Bits. A hammer-only mode allows this tool to be used for light chipping work. A slip clutch stops rotary action when a bit jams protecting the mechanism from overload. The tool can be set for a rotation-only mode for drilling in steel or wood. A 3-jaw chuck adapter kit 48-66-1370 is available.

Grounded, 3-wire cord
1-1/8" solid bit capacity, 3-1/2" thin wall core bit capacity in concrete or 4 in. capacity in masonry block
Variable speed: 0-980 rpm, 0-4,200 bpm
Powerful 7.4 amp motor provides power for a hard-hitting 2.5 ft.-lbs. of energy per blow
Three modes of operation: rotation with hammering, hammer-only and rotation-only. This versatile tool can be used for drilling in steel, wood or concrete. Use rotation-only for drilling in steel and wood with optional chuck and adapter. Use rotation with hammering when drilling in concrete. Use hammer-only for light chipping work.
Speed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioning
Lightweight, compact 14" length and well balanced design

Voltage 120 AC
Amps 7.4
Maximum Capacity 1-1/8"
Blow Energy 2.5 ft.-lbs.
No Load RPM 0-980
No Load BPM 0-4,200
Drilling Mode Rotary Hammer & Rotation Only
Chipping Yes
Clutch Yes
Anti-Vibration Yes
Cord Type 10 ft. Fixed
Handle Style D-Handle
Vibration Reduction Yes
Solid Bit Capacity 1-1/8"
Thin Wall Core Bit Capacity 4"
Length 14"
Tool Weight 8.3 lbs
Shipping Weight 14.5 lbs