The Campbell Hausfeld HV3000 3 Stage, 6 psi, 65 CFM, High Volume Low Pressure Finishing System. The turbine provides more power than the HV2500 and HV2550 for use in commercial applications that utilize heavier coatings more frequently. The HV3000 is appropriate for lacquers, stains, enamels, and other solvent based materials with flash points higher than 99 degrees Fahrenheit. Paints and solvents that contain hydrogenated hydrocarbons should not be used with this system. It can also spray latex and water borne coatings, some thinning may be required. The system comes complete with turbine, stub hose, 25 foot air hose, semi-professional spray gun equipped with all purpose material fluid set, gun wrench, thin material fluid set, cleaning brush, viscosity stick and cone strainers.
Powered by an Ametek 3 stage tangential turbine
2 full coverage air filters reduce project surface contamination
Heat dissipating stub hose and bleeder style gun combine to extend turbine brush life
System can support up to 50 feet of air hose to provide maximum seperation between the turbine and the project area
Semi-professional spray gun features pattern, air flow and material flow adjustments.
Campbell Hausfeld HV3000 Low Pressure Finishing System Specifications:
Warranty: 5 Years LmtWeight: 32.00 lb
Length: 12.50 in
Width: 22.50 in
Height: 12.75 in
Pkg Girth: 83.00 in
Cube: 2.08 cf
No comments:
Post a Comment